Compare locomotives
Add a locomotive
US Railroad Administration 2-8-8-2 (Heavy Mallet)
The heaviest of the US Railroad Administration standard designs was a 2-8-8-2 Mallet . It was strongly based on the Norfolk & Western class Y-2, which had found a good solution to the biggest problem of such large loc...
| US Railroad Administration 2-8-8-2 (Heavy Mallet)Remove | |
|---|---|
| Variant | Standard |
| Built | 1918-1919 |
| Manufacturers | ALCO;Baldwin |
| Wheel arrangement | (1D)D1 ma |
| Gauge | 1435 mm |
| Length | |
| Service mass | 240858 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | US Railroad Administration 2-8-8-2 (Heavy Mallet) Standard Remove |
|---|---|
| Built | 1918-1919 |
| Manufacturers | ALCO, Baldwin |
| Wheel arrangement | 2-8-8-2 (Mikado Mallet) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | US Railroad Administration 2-8-8-2 (Heavy Mallet) Standard Remove |
|---|---|
| Wheelbase | 17.48 m |
| Total wheelbase | 28.42 m |
| Service mass | 240.9 t |
| Adhesion mass | 216.8 t |
| Total mass | 335.7 t |
| Rigid wheelbase | 4.72 m |
| Water capacity | 45,425 l |
| Fuel capacity | 14.5 t (coal) |
Boiler
| Property | US Railroad Administration 2-8-8-2 (Heavy Mallet) Standard Remove |
|---|---|
| Grate area | 8.919 m² |
| Firebox surface | 40.413 m² |
| Tube heating surface | 528.34 m² |
| Evaporative heating surface | 568.753 m² |
| Superheater surface | 137.079 m² |
| Total heating surface | 705.8 m² |
Power plant
| Property | US Railroad Administration 2-8-8-2 (Heavy Mallet) Standard Remove |
|---|---|
| Driver diameter | 1,448 mm |
| Boiler pressure | 16.5 bar |
| Expansion type | compound |
| Cylinders | four, HP: 635 x 813 mm and LP: 991 x 813 mm |
Power
| Property | US Railroad Administration 2-8-8-2 (Heavy Mallet) Standard Remove |
|---|---|
| Power source | steam |
| Estimated power | 2,610 kW (3,549 PS) |
| Starting effort | 451.3 kN |
| Starting effort simple | 541.6 kN |
Calculated values
| Property | US Railroad Administration 2-8-8-2 (Heavy Mallet) Standard Remove |
|---|---|
| Factor of adhesion | 1 : 4.71 |
| Optimal speed | 35 km/h |
| Power-to-weight ratio | 10.8 kW/t |
| Heating Surface Equivalent | 1,045.0 m² |
| Cylinder volume/HSE | 1 : 1,092.12 |
| Adhesive weight/Total | 1 : 1.11 |
| Tractive force/Heating surface | 1 : 13.36 |
| Grate area/Heating surface | 1 : 79.14 |
| Firebox/Tube surface | 1 : 13.07 |
| Total/Superheater | 1 : 4.15 |
