Compare locomotives
Add a locomotive
Great Southern & Western class 101 “Standard Goods”
The most numerous class of Irish locomotives was a six-coupled goods locomotive, which was purchased 111 times over a period of 37 years. It carried the class number 101 on the GS&WR and was designated class J15 on th...
| Great Southern & Western class 101 “Standard Goods”Remove | |
|---|---|
| Variant | 18 inch |
| Built | 1882-1903 |
| Manufacturers | Inchicore;Beyer, Peacock & Co.;Sharp, Stewart & Co. |
| Wheel arrangement | C |
| Gauge | 1435 mm |
| Length | |
| Service mass | 32717 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Great Southern & Western class 101 “Standard Goods”18 inch |
|---|---|
| Built | 1882-1903 |
| Manufacturers | Inchicore, Beyer, Peacock & Co., Sharp, Stewart & Co. |
| Wheel arrangement | 0-6-0 (Six-coupled) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Great Southern & Western class 101 “Standard Goods”18 inch |
|---|---|
| Wheelbase | 4.72 m |
| Service mass | 32.7 t |
| Adhesion mass | 32.7 t |
| Total mass | 61.7 t |
| Rigid wheelbase | 4.72 m |
| Axle load | 11.9 t |
| Water capacity | 8,476 l |
| Fuel capacity | 4.1 t (coal) |
Boiler
| Property | Great Southern & Western class 101 “Standard Goods”18 inch |
|---|---|
| Grate area | 1.626 m² |
| Firebox surface | 8.919 m² |
| Tube heating surface | 70.978 m² |
| Evaporative heating surface | 79.897 m² |
| Total heating surface | 79.9 m² |
Power plant
| Property | Great Southern & Western class 101 “Standard Goods”18 inch |
|---|---|
| Driver diameter | 1,568 mm |
| Boiler pressure | 11 bar |
| Expansion type | simple expansion |
| Cylinders | two, 457 x 610 mm |
Power
| Property | Great Southern & Western class 101 “Standard Goods”18 inch |
|---|---|
| Power source | steam |
| Estimated power | 261 kW (355 PS) |
| Starting effort | 76.2 kN |
Calculated values
| Property | Great Southern & Western class 101 “Standard Goods”18 inch |
|---|---|
| Factor of adhesion | 1 : 4.21 |
| Optimal speed | 21 km/h |
| Power-to-weight ratio | 8.0 kW/t |
| Heating Surface Equivalent | 124.5 m² |
| Cylinder volume/HSE | 1 : 1,607.81 |
| Adhesive weight/Total | 1 : 1.00 |
| Tractive force/Heating surface | 1 : 19.91 |
| Grate area/Heating surface | 1 : 49.14 |
| Firebox/Tube surface | 1 : 7.96 |
