Compare locomotives
Add a locomotive
Frisco Lines classes 4100, 4135 and 4150
The Frisco Lines received a total of 65 Mikados with additional booster between 1923 and 1926, based on the USRA Heavy Mikado . The first 35 locomotives had Baker valve gear and were fired with coal or oil, depending ...
| Frisco Lines classes 4100, 4135 and 4150Remove | |
|---|---|
| Variant | 4100 with thermic syphons |
| Built | 1929 |
| Manufacturers | Spingfield |
| Wheel arrangement | 1D1 |
| Gauge | 1435 mm |
| Length | |
| Service mass | 156308 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Frisco Lines classes 4100, 4135 and 41504100 with thermic syphons |
|---|---|
| Built | 1929 |
| Manufacturers | Spingfield |
| Wheel arrangement | 2-8-2 (Mikado) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Frisco Lines classes 4100, 4135 and 41504100 with thermic syphons |
|---|---|
| Wheelbase | 11.25 m |
| Total wheelbase | 22.61 m |
| Service mass | 156.3 t |
| Adhesion mass | 107.1 t |
| Total mass | 263.4 t |
| Rigid wheelbase | 5.11 m |
| Axle load | 26.8 t |
| Water capacity | 45,425 l |
| Fuel capacity | 15.4 t (coal) |
Boiler
| Property | Frisco Lines classes 4100, 4135 and 41504100 with thermic syphons |
|---|---|
| Grate area | 6.531 m² |
| Firebox surface | 35.303 m² |
| Tube heating surface | 341.976 m² |
| Evaporative heating surface | 377.28 m² |
| Superheater surface | 92.253 m² |
| Total heating surface | 469.5 m² |
Power plant
| Property | Frisco Lines classes 4100, 4135 and 41504100 with thermic syphons |
|---|---|
| Driver diameter | 1,626 mm |
| Boiler pressure | 13.8 bar |
| Expansion type | simple expansion |
| Cylinders | two, 686 x 813 mm |
Power
| Property | Frisco Lines classes 4100, 4135 and 41504100 with thermic syphons |
|---|---|
| Power source | steam |
| Estimated power | 2,424 kW (3,296 PS) |
| Starting effort | 275.6 kN |
| Starting effort booster | 49.82 kN |
Calculated values
| Property | Frisco Lines classes 4100, 4135 and 41504100 with thermic syphons |
|---|---|
| Factor of adhesion | 1 : 3.81 |
| Optimal speed | 53 km/h |
| Power-to-weight ratio | 15.5 kW/t |
| Heating Surface Equivalent | 738.3 m² |
| Cylinder volume/HSE | 1 : 813.33 |
| Adhesive weight/Total | 1 : 1.46 |
| Tractive force/Heating surface | 1 : 12.26 |
| Grate area/Heating surface | 1 : 71.89 |
| Firebox/Tube surface | 1 : 9.69 |
| Total/Superheater | 1 : 4.09 |
