Compare locomotives
Add a locomotive
Long-Bell Lumber No. 1000 and 1001
Baldwin works numbers 57597 and 57598 were built in 1924 for the Long-Bell Lumber Company. The requirements included that they had to run through 40-degree curves, what meant a radius of 44.5 meters, while being able ...
| Long-Bell Lumber No. 1000 and 1001Remove | |
|---|---|
| Variant | Standard |
| Built | 1924 |
| Manufacturers | Baldwin |
| Wheel arrangement | (1C)C1 ma |
| Gauge | 1435 mm |
| Length | |
| Service mass | 95105 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Long-Bell Lumber No. 1000 and 1001 Standard Remove |
|---|---|
| Built | 1924 |
| Manufacturers | Baldwin |
| Wheel arrangement | 2-6-6-2 (Mallet Mogul) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Long-Bell Lumber No. 1000 and 1001 Standard Remove |
|---|---|
| Wheelbase | 11.35 m |
| Total wheelbase | 19.53 m |
| Service mass | 95.1 t |
| Adhesion mass | 81.7 t |
| Total mass | 140 t |
| Rigid wheelbase | 2.44 m |
| Water capacity | 18,927 l |
| Fuel capacity | 0.7 t (oil) |
Boiler
| Property | Long-Bell Lumber No. 1000 and 1001 Standard Remove |
|---|---|
| Grate area | 2.926 m² |
| Firebox surface | 14.865 m² |
| Tube heating surface | 164.16 m² |
| Evaporative heating surface | 179.024 m² |
| Superheater surface | 43.2 m² |
| Total heating surface | 222.2 m² |
Power plant
| Property | Long-Bell Lumber No. 1000 and 1001 Standard Remove |
|---|---|
| Driver diameter | 1,118 mm |
| Boiler pressure | 13.8 bar |
| Expansion type | compound |
| Cylinders | four, HP: 457 x 610 mm and LP: 711 x 610 mm |
Power
| Property | Long-Bell Lumber No. 1000 and 1001 Standard Remove |
|---|---|
| Power source | steam |
| Estimated power | 1,119 kW (1,521 PS) |
| Starting effort | 189.1 kN |
| Starting effort simple | 227.0 kN |
Calculated values
| Property | Long-Bell Lumber No. 1000 and 1001 Standard Remove |
|---|---|
| Factor of adhesion | 1 : 4.24 |
| Optimal speed | 35 km/h |
| Power-to-weight ratio | 11.8 kW/t |
| Heating Surface Equivalent | 339.8 m² |
| Cylinder volume/HSE | 1 : 1,301.92 |
| Adhesive weight/Total | 1 : 1.16 |
| Tractive force/Heating surface | 1 : 17.77 |
| Grate area/Heating surface | 1 : 75.95 |
| Firebox/Tube surface | 1 : 11.04 |
| Total/Superheater | 1 : 4.14 |
