Compare locomotives
Add a locomotive
Tasmanian Government class C
The TGR class C was a member of Beyer, Peacock's “Colonial Mogul” type that was built for mixed traffic on light rails. More of this type were built for several operators in the southern half of Australia. Features of...
| Tasmanian Government class CRemove | |
|---|---|
| Variant | |
| Built | 1912 |
| Manufacturers | TGR |
| Wheel arrangement | 1C |
| Gauge | 1067 mm |
| Length | |
| Service mass | 33326 kg |
| Top speed | |
| Power | |
| Engine |
General
| Property | Tasmanian Government class CRemove |
|---|---|
| Built | 1912 |
| Manufacturers | TGR |
| Wheel arrangement | 2-6-0 (Mogul) |
| Gauge | 1,067 mm |
Dimensions and weights
| Property | Tasmanian Government class CRemove |
|---|---|
| Wheelbase | 4.06 m |
| Total wheelbase | 10.14 m |
| Service mass | 33.3 t |
| Adhesion mass | 27.6 t |
| Total mass | 56.6 t |
| Rigid wheelbase | 2.29 m |
| Axle load | 9.2 t |
| Water capacity | 7,730 l |
| Fuel capacity | 2.5 t (coal) |
Boiler
| Property | Tasmanian Government class CRemove |
|---|---|
| Grate area | 1.463 m² |
| Firebox surface | 9.801 m² |
| Tube heating surface | 74.555 m² |
| Evaporative heating surface | 84.356 m² |
| Total heating surface | 84.4 m² |
Power plant
| Property | Tasmanian Government class CRemove |
|---|---|
| Driver diameter | 991 mm |
| Boiler pressure | 12.1 bar |
| Expansion type | simple expansion |
| Cylinders | two, 381 x 508 mm |
Power
| Property | Tasmanian Government class CRemove |
|---|---|
| Power source | steam |
| Estimated power | 261 kW (355 PS) |
| Starting effort | 76.3 kN |
Calculated values
| Property | Tasmanian Government class CRemove |
|---|---|
| Factor of adhesion | 1 : 3.55 |
| Optimal speed | 21 km/h |
| Power-to-weight ratio | 7.8 kW/t |
| Heating Surface Equivalent | 133.4 m² |
| Cylinder volume/HSE | 1 : 868.57 |
| Adhesive weight/Total | 1 : 1.21 |
| Tractive force/Heating surface | 1 : 18.90 |
| Grate area/Heating surface | 1 : 57.66 |
| Firebox/Tube surface | 1 : 7.61 |
