Compare locomotives
Add a locomotive
Austrian North Western Railway Vb, Vc, Vd and Ve
Immediately after the procurement of the Va, the ÖNWB had a total of 58 of a direct development built, which came from different manufacturers. These were the Vb from Strousberg in Hanover, the Vc from Schwartzkopff i...
| Austrian North Western Railway Vb, Vc, Vd and VeRemove | |
|---|---|
| Variant | rebuilt 1891 |
| Built | 1891 |
| Manufacturers | Strousberg;BMAG;Floridsdorf |
| Wheel arrangement | C |
| Gauge | 1435 mm |
| Length | 14521 mm |
| Service mass | 34100 kg |
| Top speed | 45 km/h |
| Power | |
| Engine |
General
| Property | Austrian North Western Railway Vb, Vc, Vd and Verebuilt 1891 |
|---|---|
| Built | 1891 |
| Manufacturers | Strousberg, BMAG, Floridsdorf |
| Wheel arrangement | 0-6-0 (Six-coupled) |
| Gauge | 1,435 mm |
Dimensions and weights
| Property | Austrian North Western Railway Vb, Vc, Vd and Verebuilt 1891 |
|---|---|
| Length | 14.52 m |
| Length loco | 8.07 m |
| Wheelbase | 3.30 m |
| Empty mass | 30.3 t |
| Service mass | 34.1 t |
| Adhesion mass | 34.1 t |
| Total mass | 61.1 t |
| Rigid wheelbase | 3.30 m |
| Axle load | 11.4 t |
| Water capacity | 7,500 l |
| Fuel capacity | 8.5 t (coal) |
Boiler
| Property | Austrian North Western Railway Vb, Vc, Vd and Verebuilt 1891 |
|---|---|
| Grate area | 1.71 m² |
| Firebox surface | 8.3 m² |
| Tube heating surface | 126.6 m² |
| Evaporative heating surface | 134.9 m² |
| Total heating surface | 134.9 m² |
Power plant
| Property | Austrian North Western Railway Vb, Vc, Vd and Verebuilt 1891 |
|---|---|
| Driver diameter | 1,185 mm |
| Boiler pressure | 10 bar |
| Expansion type | simple expansion |
| Cylinders | two, 435 x 632 mm |
Power
| Property | Austrian North Western Railway Vb, Vc, Vd and Verebuilt 1891 |
|---|---|
| Power source | steam |
| Estimated power | 320 kW (435 PS) |
| Top speed | 45 km/h |
| Starting effort | 85.8 kN |
Calculated values
| Property | Austrian North Western Railway Vb, Vc, Vd and Verebuilt 1891 |
|---|---|
| Factor of adhesion | 1 : 3.90 |
| Optimal speed | 23 km/h |
| Power-to-weight ratio | 9.4 kW/t |
| Heating Surface Equivalent | 176.4 m² |
| Cylinder volume/HSE | 1 : 1,064.92 |
| Adhesive weight/Total | 1 : 1.00 |
| Tractive force/Heating surface | 1 : 13.28 |
| Grate area/Heating surface | 1 : 78.89 |
| Firebox/Tube surface | 1 : 15.25 |
