Compare locomotives
Add a locomotive
Cambrian Railways class 61
William Aston, who had been chief engineer of the Cambrian since 1882, had already revised the six Beaconsfield class locomotives to cope with the increased train weights and tighter schedules. This concerned the expr...
General
| Property | Cambrian Railways class 61Remove |
|---|---|
| Built | 1893-1895, 1897, 1901 |
| Manufacturers | Sharp, Stewart & Co., Robert Stephenson & Co., Owestry |
| Wheel arrangement | 4-4-0 (American) |
| Gauge | 1,435 mm (Standard gauge) |
Dimensions and weights
| Property | Cambrian Railways class 61Remove |
|---|---|
| Wheelbase | 6.19 m |
| Rigid wheelbase | 2.52 m |
| Service weight | 40.9 t |
| Adhesive weight | 27.7 t |
| Axle load | 15.2 t |
| Total weight | 71.4 t |
| Water capacity | 11,364 l |
| Fuel capacity | 4.6 t (coal) |
Boiler
| Property | Cambrian Railways class 61Remove |
|---|---|
| Grate area | 1.579 m² |
| Firebox surface | 9.244 m² |
| Tube heating surface | 98.199 m² |
| Evaporative heating surface | 107.442 m² |
| Total heating surface | 107.4 m² |
Power plant
| Property | Cambrian Railways class 61Remove |
|---|---|
| Driver diameter | 1,829 mm |
| Boiler pressure | 11 bar |
| Expansion type | simple expansion |
| Cylinders | two, 457 x 610 mm |
Power
| Property | Cambrian Railways class 61Remove |
|---|---|
| Power source | steam |
| Estimated power | 429 kW (583 PS) |
| Starting effort | 65.3 kN |
Calculated values
| Property | Cambrian Railways class 61Remove |
|---|---|
| Factor of adhesion | 1 : 4.16 |
| Optimal speed | 40 km/h |
| Power-to-weight ratio | 10.5 kW/t |
| Heating Surface Equivalent | 153.7 m² |
| Cylinder volume/HSE | 1 : 1,302.59 |
| Adhesive weight/Total | 1 : 1.48 |
| Tractive force/Heating surface | 1 : 12.70 |
| Grate area/Heating surface | 1 : 68.04 |
| Firebox/Tube surface | 1 : 10.62 |