Compare locomotives
Add a locomotive
Bavarian G 4/5 N
The G 4/5 N was a small class of Consolidations derived from the E I. Although it also used experiences from the two Vauclain E I built by Baldwin, it was a two-cylinder simple. It had a high pitched boiler with a fir...
General
| Property | Bavarian G 4/5 NRemove |
|---|---|
| Built | 1905-1906 |
| Manufacturers | Krauss |
| Wheel arrangement | 2-8-0 (Consolidation) |
| Gauge | 1,435 mm (Standard gauge) |
Dimensions and weights
| Property | Bavarian G 4/5 NRemove |
|---|---|
| Length | 18.31 m |
| Wheelbase | 7.10 m |
| Total wheelbase | 15.49 m |
| Empty weight | 59 t |
| Service weight | 64.8 t |
| Adhesive weight | 55.9 t |
| Axle load | 14.4 t |
| Total weight | 110 t |
| Water capacity | 18,200 l |
| Fuel capacity | 6 t (coal) |
Boiler
| Property | Bavarian G 4/5 NRemove |
|---|---|
| Grate area | 2.85 m² |
| Firebox surface | 10.97 m² |
| Tube heating surface | 169 m² |
| Evaporative heating surface | 179.97 m² |
| Total heating surface | 180.0 m² |
Power plant
| Property | Bavarian G 4/5 NRemove |
|---|---|
| Driver diameter | 1,270 mm |
| Boiler pressure | 12 bar |
| Expansion type | simple expansion |
| Cylinders | two, 540 x 610 mm |
Power
| Property | Bavarian G 4/5 NRemove |
|---|---|
| Power source | steam |
| Estimated power | 700 kW (952 PS) |
| Starting effort | 142.9 kN |
Calculated values
| Property | Bavarian G 4/5 NRemove |
|---|---|
| Factor of adhesion | 1 : 3.84 |
| Optimal speed | 31 km/h |
| Power-to-weight ratio | 10.8 kW/t |
| Heating Surface Equivalent | 234.8 m² |
| Cylinder volume/HSE | 1 : 1,189.88 |
| Adhesive weight/Total | 1 : 1.16 |
| Tractive force/Heating surface | 1 : 16.58 |
| Grate area/Heating surface | 1 : 63.15 |
| Firebox/Tube surface | 1 : 15.41 |
