Compare locomotives
Add a locomotive
Saxon VIII V 2
For use with heavy passenger trains, the VIII V 2 was derived from the VIII V 1 express locomotive. It received significantly smaller diving wheels, but still had a two-cylinder compound engine and a Belpaire firebox ...
General
| Property | Saxon VIII V 2 Remove |
|---|---|
| Built | 1897-1899 |
| Manufacturers | Hartmann, BMAG, Esslingen, Linke-Hoffmann |
| Wheel arrangement | 4-4-0 (American) |
| Gauge | 1,435 mm (Standard gauge) |
Dimensions and weights
| Property | Saxon VIII V 2 Remove |
|---|---|
| Wheelbase | 6.60 m |
| Empty weight | 45.5 t |
| Service weight | 51.6 t |
| Adhesive weight | 30.2 t |
| Axle load | 15.1 t |
| Water capacity | 16,000 l |
Boiler
| Property | Saxon VIII V 2 Remove |
|---|---|
| Grate area | 1.87 m² |
| Firebox surface | 13.4 m² |
| Tube heating surface | 103.1 m² |
| Evaporative heating surface | 116.5 m² |
| Total heating surface | 116.5 m² |
Power plant
| Property | Saxon VIII V 2 Remove |
|---|---|
| Driver diameter | 1,590 mm |
| Boiler pressure | 12 bar |
| Expansion type | compound |
| Cylinders | two, HP: 460 x 600 mm and LP: 680 x 600 mm |
Power
| Property | Saxon VIII V 2 Remove |
|---|---|
| Power source | steam |
| Estimated power | 500 kW (680 PS) |
| Top speed | 80 km/h |
| Starting effort | 55.9 kN |
| Starting effort simple | 67.0 kN |
Calculated values
| Property | Saxon VIII V 2 Remove |
|---|---|
| Factor of adhesion | 1 : 5.30 |
| Optimal speed | 55 km/h |
| Power-to-weight ratio | 9.7 kW/t |
| Heating Surface Equivalent | 183.5 m² |
| Cylinder volume/HSE | 1 : 1,137.14 |
| Adhesive weight/Total | 1 : 1.71 |
| Tractive force/Heating surface | 1 : 10.02 |
| Grate area/Heating surface | 1 : 62.30 |
| Firebox/Tube surface | 1 : 7.69 |
