Compare locomotives
Add a locomotive
Victorian Railways class N
The class N was a 2-8-2 goods locomotive with a low axle load for use on branch lines. It was developed from the class K 2-8-0 and used many parts from this. As there were plans to convert the Australian broad gauge n...
General
| Property | Victorian Railways class N Remove |
|---|---|
| Built | 1925-1931, 1949-1950 |
| Manufacturers | Newport, North British |
| Wheel arrangement | 2-8-2 (Mikado) |
| Gauge | 1,600 mm (Irish broad gauge) |
Dimensions and weights
| Property | Victorian Railways class N Remove |
|---|---|
| Length | 20.56 m |
| Wheelbase | 9.37 m |
| Rigid wheelbase | 4.72 m |
| Total wheelbase | 17.36 m |
| Service weight | 77.2 t |
| Adhesive weight | 55.5 t |
| Axle load | 14.1 t |
| Total weight | 126.7 t |
| Water capacity | 21,365 l |
| Fuel capacity | 6.1 t (coal) |
Boiler
| Property | Victorian Railways class N Remove |
|---|---|
| Grate area | 2.88 m² |
| Firebox surface | 18.859 m² |
| Tube heating surface | 116.129 m² |
| Evaporative heating surface | 134.988 m² |
| Superheater surface | 30.101 m² |
| Total heating surface | 165.1 m² |
Power plant
| Property | Victorian Railways class N Remove |
|---|---|
| Driver diameter | 1,397 mm |
| Boiler pressure | 12.1 bar |
| Expansion type | simple expansion |
| Cylinders | two, 508 x 660 mm |
Power
| Property | Victorian Railways class N Remove |
|---|---|
| Power source | steam |
| Estimated power | 969 kW (1,317 PS) |
| Starting effort | 125.1 kN |
Calculated values
| Property | Victorian Railways class N Remove |
|---|---|
| Factor of adhesion | 1 : 4.35 |
| Optimal speed | 47 km/h |
| Power-to-weight ratio | 12.5 kW/t |
| Heating Surface Equivalent | 289.5 m² |
| Cylinder volume/HSE | 1 : 924.76 |
| Adhesive weight/Total | 1 : 1.39 |
| Tractive force/Heating surface | 1 : 15.83 |
| Grate area/Heating surface | 1 : 57.32 |
| Firebox/Tube surface | 1 : 6.16 |
| Total/Superheater | 1 : 4.48 |