Compare locomotives
Add a locomotive
Crown Prince Rudolf Railway III
The series III was an 0-6-0 freight locomotive, similar to many others in the Austro-Hungarian Empire. It had outside frames, outside cylinders, Hall cranks and inside valve gear. A total of 43 locomotives were built ...
General
| Property | Crown Prince Rudolf Railway IIIRemove |
|---|---|
| Built | 1868-1873 |
| Manufacturers | Sigl, Wiener Neustadt, Maffei, Mödling |
| Wheel arrangement | 0-6-0 (Six-coupled) |
| Gauge | 1,435 mm (Standard gauge) |
Dimensions and weights
| Property | Crown Prince Rudolf Railway IIIRemove |
|---|---|
| Wheelbase | 3.16 m |
| Rigid wheelbase | 3.16 m |
| Empty weight | 31.4 t |
| Service weight | 35 t |
| Adhesive weight | 35 t |
Boiler
| Property | Crown Prince Rudolf Railway IIIRemove |
|---|---|
| Grate area | 1.5 m² |
| Firebox surface | 7 m² |
| Tube heating surface | 109 m² |
| Evaporative heating surface | 116 m² |
| Total heating surface | 116.0 m² |
Power plant
| Property | Crown Prince Rudolf Railway IIIRemove |
|---|---|
| Driver diameter | 1,175 mm |
| Boiler pressure | 8 bar |
| Expansion type | simple expansion |
| Cylinders | two, 435 x 632 mm |
Power
| Property | Crown Prince Rudolf Railway IIIRemove |
|---|---|
| Power source | steam |
| Estimated power | 250 kW (340 PS) |
| Top speed | 45 km/h |
| Starting effort | 69.2 kN |
Calculated values
| Property | Crown Prince Rudolf Railway IIIRemove |
|---|---|
| Factor of adhesion | 1 : 4.96 |
| Optimal speed | 23 km/h |
| Power-to-weight ratio | 7.1 kW/t |
| Heating Surface Equivalent | 151.0 m² |
| Cylinder volume/HSE | 1 : 1,244.05 |
| Adhesive weight/Total | 1 : 1.00 |
| Tractive force/Heating surface | 1 : 12.46 |
| Grate area/Heating surface | 1 : 77.33 |
| Firebox/Tube surface | 1 : 15.57 |
