Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Imperial-Royal State Railways U

Austrian Federal Railways class 298, Czechoslovak State Railways class U 37, and Yugoslav Railway class 188

Austria 1894 61 produced
A locomotive of the Zillertalbahn on visit at Llanfair Peter Glyn

The U is a 0-6-2T narrow gauge locomotive built in larger numbers for several lines in Austria. The first ones were ordered by the Murtalbahn in 1894 that was operated by the kkStB. They were essentially an enlarged variant of the number 1 to 6 of the Steytalbahn. A Krauss-Helmholtz bogie connected the trailing axle with the rear driving axle, resulting in a rigid wheelbase of only 1,200 mm. Maximum train weight on the level was 515 tonnes and 90 tonnes could be hauled on two percent with 20 km/h.

In the next years, several railways in the Austrian part of the empire ordered the same model. Most were built for a gauge of 760 mm, but some in the North also for 750 mm. Production only stopped in 1922 when much more modern locomotives had been available. The Uv of the NÖLB was a variant of the U with compound engine. After a single superheated Uh ordered by the NÖLB, the BBÖ also ordered several Uh in the late twenties.

After World War I, a number of locomotives with both gauges stayed in Czechoslovakia and were designated U 37. Others were now located in Poland, Italy or Yugoslavia. The locomotives which were still in Austria became ÖBB class 298 in 1953. In Czechoslovakia, the first ones were replaced by diesel power in the late fifties and by 1964, all were withdrawn from regular service in this country. Today, some can still be found either on display or in working order with several preserved railways.

Technical data

General

Built
1894-1922
Manufacturers
Krauss Linz, StEG, BMMF, Wiener Neustadt, Floridsdorf
Wheel arrangement
0-6-2T (Webb)
Gauge
760 mm (Bosnian gauge); 750 mm (750 mm)

Dimensions and weights

Length
7.18 m
Wheelbase
4.00 m
Empty mass
18.3 t
Service mass
24.3 t
Adhesion mass
19.5 t
Rigid wheelbase
1.20 m
Axle load
6.5 t
Water capacity
3,200 l
Fuel capacity
1.4 t (coal)

Boiler

Grate area
1 m²
Firebox surface
4.42 m²
Tube heating surface
46.27 m²
Evaporative heating surface
50.69 m²
Total heating surface
50.7 m²

Power plant

Driver diameter
800 mm
Boiler pressure
12 bar
Expansion type
simple expansion
Cylinders
two, 290 x 400 mm

Power

Power source
steam
Indicated power
160 kW (218 PS)
Top speed
35 km/h
Starting effort
42.9 kN

Calculated values

Factor of adhesion
1 : 4.46
Optimal speed
23 km/h
Power-to-weight ratio
6.6 kW/t
Heating Surface Equivalent
72.8 m²
Cylinder volume/HSE
1 : 725.95
Adhesive weight/Total
1 : 1.25
Tractive force/Heating surface
1 : 17.67
Grate area/Heating surface
1 : 50.69
Firebox/Tube surface
1 : 10.47
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.