Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Nickel Plate Road class N-1

United States 1902 10 produced
Railway and Locomotive Engineering, July 1902

The ten members of the class N-1 were built in the time when Brooks became part of ALCO. They had been ordered by John McKenzie as Consolidations for use in fast freight service. For this, they were equipped with 62-inch drivers. The cylinders measured 19 by 28 inches and had slide valves which were controlled by inside Stephenson link motion. The saturated boiler was mounted in a high pitched position and had a firebox with 136.5 square feet of direct heating surface plus 23.8 square feet in arch tubes. In contrast to their successor Consolidations they were never superheated, but rebuilt to 0-6-0 switchers and scrapped in 1934.

Technical data

General

Built
1902
Manufacturers
ALCO
Wheel arrangement
2-8-0 (Consolidation)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
19.05 m
Wheelbase
7.62 m
Total wheelbase
15.96 m
Service mass
71.7 t
Adhesion mass
63.5 t
Total mass
163.3 t
Rigid wheelbase
5.11 m
Axle load
15.9 t
Water capacity
18,927 l
Fuel capacity
9.1 t (coal)

Boiler

Grate area
4.199 m²
Firebox surface
14.892 m²
Tube heating surface
218.601 m²
Evaporative heating surface
233.493 m²
Total heating surface
233.5 m²

Power plant

Driver diameter
1,575 mm
Boiler pressure
13.8 bar
Expansion type
simple expansion
Cylinders
two, 483 x 711 mm

Power

Power source
steam
Estimated power
895 kW (1,217 PS)
Starting effort
123.3 kN

Calculated values

Factor of adhesion
1 : 5.05
Optimal speed
45 km/h
Power-to-weight ratio
12.5 kW/t
Heating Surface Equivalent
308.0 m²
Cylinder volume/HSE
1 : 844.89
Adhesive weight/Total
1 : 1.13
Tractive force/Heating surface
1 : 11.03
Grate area/Heating surface
1 : 55.61
Firebox/Tube surface
1 : 14.68
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.