Banner
Navigation
loco-info.com
The reference for locomotives and railcars

French Northern Railway No. 5.001 to 5.022 and 5.031 to 5.120

French State Railway 2-150 A 1 to 112

France 1912 112 produced
5.001 on a postcard PD

Shortly before World War I, the Nord searched for a way to increase the capacity on its 250 km line from the coal fields at Lens to Paris. Asselin had two locomotives built with four-cylinder compound engine in the Nord's own La Chapelle shops, the Consolidation 4.002 and the Decapod 5.001. Both had the same firebox, but the Decapod had tubes which were 1.5 metres longer. As the 5.001 was more powerful, a second prototype numbered 5.002 was built.

Six more were also completed in the same year, two of them in the Nord's Hellemmes shops. Production of 104 more locomotives only started in 1920 and was completed in 1929. They got relatively small tenders with a capacity of 17 tonnes of water and six tonnes of coal. On grades of 1.3 percent, they could haul 950 tonnes at 19 km/h. In 1926 all got a reheater for the exhaust of the high-pressure cylinders and in 1936, all received a Lemaître blast pipe. SNCF designated them 2-150 A and used them until 1958.

Technical data

General

Built
1912-1929
Manufacturers
La Chapelle, Hellemmes, SACM, SFCM
Wheel arrangement
2-10-0 (Decapod)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length loco
13.35 m
Wheelbase
10.12 m
Total wheelbase
16.40 m
Service mass
99 t
Adhesion mass
88.4 t
Total mass
138.1 t
Rigid wheelbase
7.62 m
Water capacity
17,000 l
Fuel capacity
6 t (coal)

Boiler

Grate area
3.32 m²
Firebox surface
17.38 m²
Tube heating surface
234.25 m²
Evaporative heating surface
251.63 m²
Superheater surface
62.23 m²
Total heating surface
313.9 m²

Power plant

Driver diameter
1,550 mm
Boiler pressure
17 bar
Expansion type
compound
Cylinders
four, HP: 490 x 600 mm and LP: 680 x 700 mm

Power

Power source
steam
Estimated power
1,375 kW (1,869 PS)
Starting effort
185.9 kN
Starting effort simple
223.0 kN

Calculated values

Factor of adhesion
1 : 4.66
Optimal speed
45 km/h
Power-to-weight ratio
13.9 kW/t
Heating Surface Equivalent
463.0 m²
Cylinder volume/HSE
1 : 1,037.83
Adhesive weight/Total
1 : 1.12
Tractive force/Heating surface
1 : 12.37
Grate area/Heating surface
1 : 94.54
Firebox/Tube surface
1 : 13.48
Total/Superheater
1 : 4.04
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.