Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Rhodesia Railways classes 15 and 15A

Rhodesia 1940 74 produced
flickr/Historical Railway Images PD

The Rhodesian Railways had been using the 16th class since 1929, which was a Garratt with 2-8-2+2-8-2 wheel arrangement and showed good running characteristics. However, there was a desire for a locomotive with larger wheels that could also be used to pull faster trains on flatter routes. The 4-6-2+2-6-4 wheel arrangement was initially considered. However, the 15th class developed as a result was ultimately based on the class 250 of the Sudan Railways, which had the 4-6-4+4-6-4 wheel arrangement, which is also known as “Double Baltic” or “Double Hudson”.

The first production lot was just four engines, delivered by Beyer, Peacock & Co. in 1940. They were intended for the almost 800 km long line between Bulawayo and Mafeking in South Africa, which led through Bechuanaland (now Botswana). However, the bridges on this route could not be upgraded due to the war. Instead they were used on the Salisbury-Gwelo route, replacing the 12th class 4-8-2 locos.

Another 30 engines were made between 1947 and 1949. From 1949 another 30 engines of a modified variant followed, which had an increased boiler pressure of 200 instead of 180 psi and were designated class 15A. In 1952 there were ten more of this design, the production of which had been handed over to Franco-Belge and which, thanks to thermic syphons, had a larger firebox heating surface. The total number of 74 made them the second most built Garratt locomotive.

They were later used on the originally planned line through Botswana and were the only locomotives there until the DE2 class diesel locomotives arrived on this line in 1973. They could haul passenger trains weighing 550 tons at more than 50 mph and were also used in front of freight trains weighing 1,000 tons. The boilers of the engines of 15th, 15A and 16th classes were often exchanged.

After the founding of Zambia on the territory of the former Northern Rhodesia, some examples went to the Zambia Railways. In Southern Rhodesia, the state of Zimbabwe was only formed in 1980, so the remaining engines went to the National Railways of Zimbabwe. Since the planned retirement had to be postponed for financial reasons, the class 15A locomotives were modernized between 1980 and 1983. They were named after African animals.

After the non-modernized 15th class locomotives were soon phased out, the class 15A was renamed the 15th class. The modernized locomotives were not retired until after the turn of the millennium and ten were even reactivated in 2006 and 2007 and underwent some necessary repairs. Two of these were leased to the Hwange Mining Company until 2018, making them the last steam locomotives in Africa to be in regular service.

Technical data

General

Property 15 15A 15A Franco-Belge
Built 1940, 1947-1949 1949-1950 1952
Manufacturers Beyer, Peacock & Co. Franco-Belge
Wheel arrangement 4-6-4+4-6-4T (Double Hudson (Garratt))
Gauge 1,067 mm (Cape gauge)

Dimensions and weights

Property 15 15A 15A Franco-Belge
Total wheelbase 25.68 m
Service mass 182.4 t 189.7 t
Adhesion mass 82.3 t 91.4 t
Rigid wheelbase 3.20 m
Axle load 13.5 t 16.2 t
Water capacity 31,824 l
Fuel capacity 10.2 t (coal) 12.7 t (coal) 10.2 t (coal)

Boiler

Property 15 15A 15A Franco-Belge
Grate area 4.599 m² 4.608 m²
Firebox surface 19.695 m² 23.597 m²
Tube heating surface 197.326 m² 197.977 m²
Evaporative heating surface 217.022 m² 221.574 m²
Superheater surface 45.894 m²
Total heating surface 262.9 m² 267.5 m²

Power plant

Property 15 15A 15A Franco-Belge
Driver diameter 1,448 mm
Boiler pressure 12.4 bar 13.8 bar
Expansion type simple expansion
Cylinders four, 444 x 660 mm

Power

Property 15 15A 15A Franco-Belge
Power source steam
Estimated power 1,193 kW (1,622 PS) 1,342 kW (1,825 PS) 1,417 kW (1,927 PS)
Starting effort 190.1 kN 211.3 kN

Calculated values

Property 15 15A 15A Franco-Belge
Factor of adhesion 1 : 4.25
Optimal speed 39 km/h 42 km/h
Power-to-weight ratio 6.5 kW/t 7.1 kW/t 7.5 kW/t
Heating Surface Equivalent 407.3 m² 431.3 m²
Cylinder volume/HSE 1 : 1,006.48 1 : 950.33
Adhesive weight/Total 1 : 2.22 1 : 2.07
Tractive force/Heating surface 1 : 15.10 1 : 16.78 1 : 16.50
Grate area/Heating surface 1 : 57.17 1 : 57.06 1 : 58.04
Firebox/Tube surface 1 : 10.02 1 : 8.39
Total/Superheater 1 : 4.73 1 : 4.83

Topics

  • steam locomotive
  • passenger
  • freight
  • Garratt
CompareComment
Last changed: 10/2022

Watch on YouTube

Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.