Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Swiss Federal Railways C 5/6

Switzerland 1913 30 produced
No. 2969 “Alfred Escher” in 2017 in Lavorgo Hanspeter Baumeler CC BY-SA 4.0

For use in front of freight and express trains on the Gotthard, the SBB ordered the C 5/6, which was similar to the C 4/5 with a fifth coupled axle. Initially, three locomotives were built with four compound-acting cylinders and two with four simple-acting cylinders. The remaining 25 were built as compounds. Because of their power, they quickly earned the nickname “Elephant”. The 2901 and 2902 were also rebuilt into compound locomotives in 1920 and 1922, but did not achieve the same power as the others and were retired in 1933.

Since the Gotthard was electrified in the 1920s, the C 5/6 were relocated to the flatlands, where they were also used for heavy shunting duties. Since the Reichsbahn did not have enough locomotives for deliveries to Switzerland during the Second World War, 16 C 5/6s were leased to them. After the war, some were leased to France for the same reason. Their retirements took place between 1954 and 1968. Today there are two operational C 5/6 preserved and two more that are not operational.

Technical data

General

Property production 2901-2902
Built 1913-1917 1913
Manufacturers SLM
Wheel arrangement 2-10-0 (Decapod)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property production 2901-2902
Length 19.20 m
Wheelbase 8.80 m
Service mass 85.8 t 85.3 t
Adhesion mass 76.1 t 75.6 t
Total mass 127.6 t 127.1 t
Rigid wheelbase 6.45 m
Water capacity 18,000 l
Fuel capacity 7 t (coal)

Boiler

Property production 2901-2902
Grate area 3.7 m²
Firebox surface 13.7 m²
Tube heating surface 197.65 m² 207.5 m²
Evaporative heating surface 211.35 m² 221.2 m²
Superheater surface 54.45 m² 57.5 m²
Total heating surface 265.8 m² 278.7 m²

Power plant

Property production 2901-2902
Driver diameter 1,330 mm
Boiler pressure 15.5 bar 13 bar
Expansion type compound simple expansion
Cylinders four, HP: 470 x 640 mm and LP: 710 x 640 mm four, 470 x 640 mm

Power

Property production 2901-2902
Power source steam
Indicated power 1,190 kW (1,618 PS)
Top speed 65 km/h
Starting effort 194.8 kN 234.9 kN
Starting effort simple 233.7 kN
Estimated power 1,050 kW (1,428 PS)

Calculated values

Property production 2901-2902
Factor of adhesion 1 : 3.83 1 : 3.16
Optimal speed 37 km/h 27 km/h
Power-to-weight ratio 13.9 kW/t 12.3 kW/t
Heating Surface Equivalent 388.8 m² 404.7 m²
Cylinder volume/HSE 1 : 1,223.05 1 : 1,097.47
Adhesive weight/Total 1 : 1.13
Tractive force/Heating surface 1 : 15.30 1 : 17.60
Grate area/Heating surface 1 : 71.84 1 : 75.32
Firebox/Tube surface 1 : 14.43 1 : 15.15
Total/Superheater 1 : 3.88 1 : 3.85
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.