Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

South African class 15E

South Africa 1935 44 produced
flickr/Historical Railway Images

The class 15E was designed by A.G. Watson as a further development of the class 15C Mountain for mixed service. At that time, in 1935, Watson introduced several standardization features for the classes 15E, 16E and 19C, which had been ordered simultaneously. All of these classes featured rotary cam poppet valves. The 16E Pacific and the 15E Mountain had the same 24-by-28-inch cylinders. The Mountain was equipped with the Watson Standard 3B boiler, in contrast to the shorter 3A boiler on the Pacific. Both had virtually the same firebox with a grate area of 63 square feet, 206 square feet in the walls, and 26 square feet in arch tubes.

The first 20 were built in 1935 by Robert Stephenson & Hawthorns. In the following year, Henschel built 16 and BMAG built eight. The German locomotives were three-quarters of a ton lighter. They were nicknamed “Bongols” and initially hauled the heaviest and most important trains. Soon, the Class 15F was built in larger numbers with Walschaerts valve gear. In the 1950s, both were pushed into secondary service and replaced by the classes 25 and 25NC. The last ones were taken out of service in 1973, though some were sold to Rhodesia or Mozambique. 2878 is preserved by the Transnet Heritage Foundation in Bloemfontein.

Technical data

General

Built
1935-1936
Manufacturers
Robert Stephenson & Hawthorns, Henschel, BMAG
Wheel arrangement
4-8-2 (Mountain)
Gauge
1,067 mm (Cape gauge)

Dimensions and weights

Length
22.40 m
Wheelbase
10.87 m
Total wheelbase
19.97 m
Service mass
110.7 t
Adhesion mass
74.7 t
Total mass
181.3 t
Rigid wheelbase
4.80 m
Axle load
19 t
Water capacity
118,711 l
Fuel capacity
3.3 t (coal)

Boiler

Grate area
5.853 m²
Firebox surface
21.554 m²
Tube heating surface
294.317 m²
Evaporative heating surface
315.871 m²
Superheater surface
62.803 m²
Total heating surface
378.7 m²

Power plant

Driver diameter
1,524 mm
Boiler pressure
14.5 bar
Expansion type
simple expansion
Cylinders
two, 610 x 711 mm

Power

Power source
steam
Estimated power
1,864 kW (2,534 PS)
Starting effort
213.4 kN

Calculated values

Factor of adhesion
1 : 3.43
Optimal speed
53 km/h
Power-to-weight ratio
16.8 kW/t
Heating Surface Equivalent
549.2 m²
Cylinder volume/HSE
1 : 755.85
Adhesive weight/Total
1 : 1.48
Tractive force/Heating surface
1 : 11.77
Grate area/Heating surface
1 : 64.70
Firebox/Tube surface
1 : 13.65
Total/Superheater
1 : 5.03
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.