Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Bavarian and Palatinate Railways R 4/4

Germany 1913 51 produced
No. 4180 in the transitional period to the Reichsbahn, here still with Länderbahn markings Oberreichsbahnrat Dr. Ing. Rudolf Kallmünzer PD

The R 4/4 was a tank locomotive for heavy shunting service, which was built in small numbers for the Pfalzbahn from 1913 and was later procured in larger numbers by the Bavarian State Railways. Although they worked with saturated steam, they proved their efficiency and were able to survive into the Bundesbahn era. The boiler with a relatively large diameter was placed very high in order to be able to accommodate a generously dimensioned and wide but not too long firebox above the coupled wheels. The water tank was therefore installed below the boiler, since there was now more space than on the sides.

Production for the Pfalzbahn included nine engines that were completed in 1913 and 1914. There they were mainly used for shunting over longer distances, as they could reach a maximum speed of 45 km/h on the flat with trains of up to 1,000 tonnes.

Between 1918 and 1925, Bavaria procured another 42 engines, which in terms of performance hardly differed from the Palatinate type. However, they had additional water tanks on the sides of the boiler, which increased the water supply to up to nine cubic meters. In addition, the steam dome and the sandbox were now arranged separately from each other and were no longer located under a common cover on the top of the boiler. In 1925, the Reichsbahn took over all but two machines and gave them the numbers 92 2001 to 92 2049. The remaining two had been handed over to Saarland in 1921 and only returned in 1935. After the Second World War, almost all of the examples remained with the Bundesbahn, which used them in the Palatinate and Bavaria. The last one was retired in 1962.

Technical data

General

Built
1913-1914, 1918-1925
Manufacturers
Krauss
Wheel arrangement
0-8-0T (Eight-coupled)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
11.04 m
Wheelbase
4.50 m
Service mass
66.9 t
Adhesion mass
66.9 t
Rigid wheelbase
4.50 m
Axle load
16.9 t
Water capacity
7,500 l
Fuel capacity
2 t (coal)

Boiler

Grate area
2 m²
Evaporative heating surface
125.1 m²
Total heating surface
125.1 m²

Power plant

Driver diameter
1,216 mm
Boiler pressure
12 bar
Expansion type
simple expansion
Cylinders
two, 530 x 650 mm

Power

Power source
steam
Indicated power
419 kW (570 PS)
Top speed
45 km/h
Starting effort
153.2 kN

Calculated values

Factor of adhesion
1 : 4.29
Optimal speed
16 km/h
Power-to-weight ratio
6.3 kW/t
Adhesive weight/Total
1 : 1.00
Tractive force/Heating surface
1 : 25.57
Grate area/Heating surface
1 : 62.55
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.