Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Austrian Southern Railway class 32c

Austrian Federal Railways (BBÖ) class 58, Italian State Railway class 292, and Hungarian State Railways series 333

Austria-Hungary 1884 73 produced
No. 1672 PD

The class 32c of the Südbahn was a 0-6-0 freight locomotive and a direct successor of the 32a and 32b. Like its predecessors, it had a boiler overhanging at the front and the rear, but its Stephenson valve gear was now installed inside the frames. For use on steep lines, it had two steam domes. After only 21 of the predecessor classes had been built, a total of 73 members of the class 32c were built between 1884 and 1900. They came from the StEG factory, from Wiener Neustadt, from Floridsdorf and from MÁVAG.

Although designed as freight locomotives, they were also used for other types of trains. They could be found on the Semmering, in South Tyrol, in the Puster Valley, on the Karst and in Hungary. After World War I, only 20 remained in Austria and became BBÖ class 58. The last one of these was taken over by the Reichsbahn in 1938 and was now numbered 53 7121.

18 locomotives which had been in use in Hungary now became class 333 of the MÁV. The last one of these survived until 1966. With 29, the Italian FS was now the largest user of the 32c. Here they became gruppo 333 and most were already retired in the twenties. Of the last four, three were retired in 1932 and the last one in 1934.

Technical data

General

Built
1884-1900
Manufacturers
StEG, Wiener Neustadt, Floridsdorf, MÁVAG
Wheel arrangement
0-6-0 (Six-coupled)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
14.92 m
Wheelbase
3.24 m
Total wheelbase
10.35 m
Service mass
42 t
Adhesion mass
42 t
Rigid wheelbase
3.24 m
Axle load
14 t
Water capacity
10,700 l
Fuel capacity
5.9 t (coal)

Boiler

Grate area
1.8 m²
Firebox surface
9.5 m²
Tube heating surface
118 m²
Evaporative heating surface
127.5 m²
Total heating surface
127.5 m²

Power plant

Driver diameter
1,259 mm
Boiler pressure
11 bar
Expansion type
simple expansion
Cylinders
two, 480 x 610 mm

Power

Power source
steam
Indicated power
355 kW (483 PS)
Top speed
45 km/h
Starting effort
104.4 kN

Calculated values

Factor of adhesion
1 : 3.95
Optimal speed
21 km/h
Power-to-weight ratio
8.5 kW/t
Heating Surface Equivalent
175.0 m²
Cylinder volume/HSE
1 : 1,261.52
Adhesive weight/Total
1 : 1.00
Tractive force/Heating surface
1 : 17.10
Grate area/Heating surface
1 : 70.83
Firebox/Tube surface
1 : 12.42
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.