Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Bavarian R 3/3

German Reichsbahn class 897-8

Germany 1906 108 produced
Former No. 4701 of the K.Bay.Sts.B. in original livery in October 1985 in Bochum-Dahlhausen MPW57 PD

The class R 3/3 locomotives were small freight tank locomotives that were primarily intended for shunting operations and were therefore also given the designation “R”. They were almost identical to the D IIII, which had been built since the end of the nineteenth century. They were six-coupled saturated locomotives without carrying axles and with a Westinghouse air brake.

The first 15 locomotives were delivered in 1906 and a further three followed in 1913. After the founding of the Deutsche Reichsbahn, the Bavarian group administration had further need and so the majority of production, 90 locomotives, was only delivered between 1921 and 1923. The latter had an axle load increased from 15 to 16 tonnes with otherwise identical performance data. When the locomotives of the pre-war variants were renumbered, they were assigned the class 897 and the newer ones became 898. Some remained in Austria after the Second World War, where they became class 789 while retaining their road numbers. The Polish state railway took over some of the locomotives from Silesia as Tkh5.

In Germany, they continued to be used by the Bundesbahn as well, so that almost all of them were still in service at the end of the 1950s. However, they were then taken out of service within a relatively short period of time, as larger numbers of diesel locomotives were now available for shunting service. The last locomotive was therefore taken out of service in 1964. 89 801, former number 4701, is the only surviving example today. It was restored to its original livery and lettering and was kept in the DB Museum Nuremberg until 2005. After a fire, the locomotive was refurbished in Koblenz and is now located there.

Technical data

General

Property 1906 variant 1921 variant
Built 1906, 1913 1921-1923
Manufacturers Krauss
Wheel arrangement 0-6-0T (Six-coupled)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property 1906 variant 1921 variant
Length 9.41 m 9.97 m
Wheelbase 3.70 m
Service mass 44.8 t 47.6 t
Adhesion mass 44.8 t 47.6 t
Rigid wheelbase 3.70 m
Axle load 14.9 t 15.9 t

Boiler

Property 1906 variant 1921 variant
Grate area 1.61 m²
Firebox surface 6.4 m²
Tube heating surface 89.6 m²
Evaporative heating surface 96 m²
Total heating surface 96.0 m²

Power plant

Property 1906 variant 1921 variant
Driver diameter 1,216 mm
Boiler pressure 12 bar
Expansion type simple expansion
Cylinders two, 420 x 610 mm

Power

Property 1906 variant 1921 variant
Power source steam
Indicated power 315 kW (428 PS)
Top speed 45 km/h
Starting effort 90.3 kN

Calculated values

Property 1906 variant 1921 variant
Factor of adhesion 1 : 4.87 1 : 5.17
Optimal speed 21 km/h
Power-to-weight ratio 7.0 kW/t 6.6 kW/t
Heating Surface Equivalent 128.0 m²
Cylinder volume/HSE 1 : 1,320.50
Adhesive weight/Total 1 : 1.00
Tractive force/Heating surface 1 : 19.64
Grate area/Heating surface 1 : 59.63
Firebox/Tube surface 1 : 14.00
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.