Banner
Navigation
loco-info.com
The reference for locomotives and railcars

South African class MF

South Africa 1910 14 produced
No. 1627, former CSAR No. 1023 ALCO / collection Frank Holland

The South African class MF was a 2-6-6-2 Mallet originally ordered by the Central South African Railways (CSAR). They were built by ALCO and based on the MD prototype delivered in 1910, but were superheated. After delivery to South Africa in 1911 in parts, they were erected at Pretoria. Although the Union of South Africa had already been founded at this time, the first nine were still delivered to the CSAR and numbered 1015 to 1023. The last five were directly delivered to the SAR and called class MF No. 1629 to 1633. The first nine were renumbered 1619 to 1627.

While the first nine got an XS tender with ten tons of coal and 5,000 gallons of water, the last five got XM4 tenders with also ten tons of coal, but only 4,000 gallons of water. They were originally used in coal traffic between Witbank and Germiston where they hauled 1,600 tons on inclines of one percent. Between 1923 and 1925, six were simpled. Three of these came to the East London area whey they had to fight 2.5 percent inclines, but apparently without much success. All had been scrapped by 1939.

Technical data

General

Property 1619-1927 1629-1633
Built 1910-1911
Manufacturers ALCO
Wheel arrangement 2-6-6-2 (Mallet Mogul)
Gauge 1,067 mm (Cape gauge)

Dimensions and weights

Property 1619-1927 1629-1633
Length 22.44 m
Wheelbase 12.27 m
Total wheelbase 19.96 m
Service mass 104.3 t
Adhesion mass 88.9 t
Total mass 160.4 t 156.1 t
Rigid wheelbase 2.54 m
Axle load 15.4 t
Water capacity 22,731 l 18,185 l
Fuel capacity 10.2 t (coal)

Boiler

Property 1619-1927 1629-1633
Grate area 4.599 m²
Firebox surface 14.493 m²
Tube heating surface 228.505 m²
Evaporative heating surface 242.997 m²
Superheater surface 51.933 m²
Total heating surface 294.9 m²

Power plant

Property 1619-1927 1629-1633
Driver diameter 1,168 mm
Boiler pressure 13.8 bar
Cylinders four, HP: 457 x 660 mm and LP: 724 x 660 mm

Power

Property 1619-1927 1629-1633
Estimated power 1,044 kW (1,419 PS)

Calculated values

Property 1619-1927 1629-1633
Optimal speed 32 km/h
Power-to-weight ratio 10.0 kW/t
Heating Surface Equivalent 419.3 m²
Cylinder volume/HSE 1 : 1,165.30
Adhesive weight/Total 1 : 1.17
Grate area/Heating surface 1 : 64.13
Firebox/Tube surface 1 : 15.77
Total/Superheater 1 : 4.68
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.