Banner
Navigation
loco-info.com
The reference for locomotives and railcars

German Federal Railway E 41

German Federal Railway class 141

Germany 1956 451 produced
141 201 with Silberling cars in July 1989 in Braunschweig Roger Wollstadt CC BY-SA 2.0

The E 41 was developed as a standard locomotive for commuter traffic and for passenger traffic on branch lines. The aim of the development was to achieve an axle load of 15 tonnes despite a maximum speed of 120 km/h. For this purpose, a significantly simplified electrical system was installed, which significantly reduced the power compared to the sister locomotives. However, multiple controls were installed throughout in order to be able to implement push-pull train operation on a large scale.

The traction motors were derived from those of the ET 30 EMUs. In contrast to the high-voltage tap changer of the other standard electric locomotives, the E 41 was given a low-voltage tap changer that was cheaper to implement. While with the other locomotives a notch could be preselected and was engaged automatically by the tap changer, the 28 notches on the E 41 could only be addressed by up and down control. During development, no attention was paid to the fact that this type of tab changer produces arcs with high amperage. The resulting noise earned the locomotives the nickname “firecracker”. With this equipment, the E 41 only briefly produced 3,700 kW, which was the hourly output of the E 10 and E 40. The hourly output of the E 41 was significantly lower at 2,400 kW. Although the achieved axle load of 16.6 tonnes was higher than originally planned, it did not significantly limit the area of application.

A total of 451 locomotives were manufactured up to 1971, which have been known as class 141 since 1968. They wore a variety of different liveries, some of which indicated their use as an S-Bahn. As early as the late 1980s, there were plans to reduce the stock, since more and more powerful electric locomotives were either retrofitted for use in push-pull trains or were delivered directly. Thanks to the introduction of clock-face schedule, however, there was an increased demand for push-pull locomotives, so that most of the units stayed in service longer. In the 1990s they faced competition from the large number of class 143 locomotives that came to West Germany from the former GDR Reichsbahn. Around the turn of the millennium, the stock of the series fell sharply, so that by 2005 it had almost disappeared.

Technical data

General

Property 141 001 to 226 141 227 to 451
Built 1956-1971
Manufacturers mechanical part: Krupp, Henschel, Krauss-Maffei, electrical part: SSW, BBC, AEG
Wheel arrangement B-B
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property 141 001 to 226 141 227 to 451
Length 15.62 m
Wheelbase 11.30 m
Service mass 66.4 t 72.5 t
Adhesion mass 66.4 t 72.5 t
Rigid wheelbase 3.40 m
Axle load 16.6 t 18.1 t

Power

Property 141 001 to 226 141 227 to 451
Power source electric - AC
Hourly power 2,400 kW (3,263 PS)
Continuous power 2,310 kW (3,141 PS)
Top speed 120 km/h
Starting effort 216.0 kN

Calculated values

Property 141 001 to 226 141 227 to 451
Factor of adhesion 1 : 3.02 1 : 3.29
Power-to-weight ratio 36.1 kW/t 33.1 kW/t
Adhesive weight/Total 1 : 1.00

Topics

  • electric locomotive
  • passenger
CompareComment
Last changed: 02/2022

Watch on YouTube

Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.