Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Baden X d

Baden VII a and German Reichsbahn class 5385

Germany 1866 171 produced
Factory photo of the manufacturer MBG Karlsruhe PD

The type X d, known as VII a according to the new scheme from 1868, was the first freight locomotive to be purchased in large numbers by the Grand Duchy of Baden State Railways. With more and more improvements, it was able to stay in production from 1866 to 1891, resulting in 171 engines from 17 batches.

To increase the adhesive weight, all three axles were coupled, with the power being applied by the outside cylinders to the middle axle. The Stephenson-type valve gear was inside, and the greater wheelbase between the first two axles compared to the rear two is visible. In the first three batches, a large steam dome was used directly above the firebox, later a Belpaire firebox and a steam dome on the boiler barrel were used. Boiler pressure was nine bars for most batches, but was increased to ten bars for the last two batches due to advances in manufacturing and materials. Later, some engines even received a new boiler with twelve bars pressure. Two and three-axle models with different capacities were used as tenders. After retiring from line service, some locomotives were converted into tank locomotives and received a new driver's cab that was better suited for shunting.

By the outbreak of the First World War, 141 of the 171 units were still in use and the Reichsbahn finally took over 44 units in 1925, including three units from the first year of production. However, not only these were already obsolete, but also the newer batches and thus all examples of the locomotive now designated as class 5385 were retired before 1930.

Technical data

General

Property 1866 variant 1869 variant 1890 variant
Built 1866-1867 1868-1889 1890-1891
Manufacturers MBG Karlsruhe
Wheel arrangement 0-6-0 (Six-coupled)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property 1866 variant 1869 variant 1890 variant
Length 14.65 m 14.77 m
Wheelbase 3.45 m
Empty mass 31.1 t 33.8 t 35.6 t
Service mass 35.6 t 38.3 t 40.2 t
Adhesion mass 35.6 t 38.3 t 40.2 t
Rigid wheelbase 3.45 m
Axle load 11.8 t 12.8 t 13.4 t
Water capacity 8,000 l
Fuel capacity 4 t (coal)

Boiler

Property 1866 variant 1869 variant 1890 variant
Grate area 1.26 m² 1.33 m² 1.47 m²
Firebox surface 7 m² 7.18 m² 7.5 m²
Tube heating surface 116.52 m² 115.16 m² 116.36 m²
Evaporative heating surface 123.52 m² 122.34 m² 123.86 m²
Total heating surface 123.5 m² 122.3 m² 123.9 m²

Power plant

Property 1866 variant 1869 variant 1890 variant
Driver diameter 1,220 mm 1,250 mm 1,262 mm
Boiler pressure 9 bar 10 bar
Expansion type simple expansion
Cylinders two, 457 x 635 mm

Power

Property 1866 variant 1869 variant 1890 variant
Power source steam
Estimated power 240 kW (326 PS) 250 kW (340 PS) 300 kW (408 PS)
Top speed 45 km/h
Starting effort 83.2 kN 81.2 kN 89.3 kN

Calculated values

Property 1866 variant 1869 variant 1890 variant
Factor of adhesion 1 : 4.20 1 : 4.63 1 : 4.41
Optimal speed 18 km/h 19 km/h 21 km/h
Power-to-weight ratio 6.7 kW/t 6.5 kW/t 7.5 kW/t
Heating Surface Equivalent 158.5 m² 158.2 m² 161.4 m²
Cylinder volume/HSE 1 : 1,314.14 1 : 1,316.47 1 : 1,291.01
Adhesive weight/Total 1 : 1.00
Tractive force/Heating surface 1 : 14.06 1 : 13.86 1 : 15.06
Grate area/Heating surface 1 : 98.03 1 : 91.98 1 : 84.26
Firebox/Tube surface 1 : 16.65 1 : 16.04 1 : 15.51
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.