Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Imperial-Royal State Railways class 4

Czechoslovak State Railways class 254.2, Polish State Railways Od13, and Italian State Railway class 543

Austria 1885 213 produced
PD

The class 4 was the first express locomotive directly ordered by the kkStB. They had the wheel arrangement 4-4-0 and a driver diameter of 1,820 mm. Based on the class 1 that had been built since 1877 for several railway companies, it had the same cylinder dimensions, but the drivers had been enlarged by 100 mm. A total of 180 were built directly for the kkStB between 1885 and 1896 by four manufacturers. 13 were rebuilt from the class 3 that had originally been ordered by the KFJB and 20 came from smaller railways. Five fairly similar locomotives were used by the EWA as IIa.

After World War I around 50 came to Czechoslovakia and formed ČSD class 254.2. Around 30 now were in Poland and became PKP Od13. Twelve came to Italy and formed FS class 543. The kingdom of the Serbs, Croats and Slovenes received 18 and finally, a few came to the Romanian CFR. The locomotives which stayed in Austria were still designated class 4. The BBÖ retired the last one in 1930 and the ČSD did the same in 1937.

Technical data

General

Built
1885-1897
Manufacturers
Wiener Neustadt, Floridsdorf, Krauss Linz, StEG
Wheel arrangement
4-4-0 (American)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length loco
8.87 m
Wheelbase
5.90 m
Empty mass
39.5 t
Service mass
44.5 t
Adhesion mass
26.5 t
Rigid wheelbase
2.50 m
Axle load
13.5 t

Boiler

Grate area
2.06 m²
Firebox surface
7.92 m²
Tube heating surface
119.12 m²
Evaporative heating surface
127.04 m²
Total heating surface
127.0 m²

Power plant

Driver diameter
1,820 mm
Boiler pressure
11 bar
Expansion type
simple expansion
Cylinders
two, 435 x 632 mm

Power

Power source
steam
Estimated power
400 kW (544 PS)
Top speed
80 km/h
Starting effort
61.4 kN

Calculated values

Factor of adhesion
1 : 4.23
Optimal speed
40 km/h
Power-to-weight ratio
9.0 kW/t
Heating Surface Equivalent
166.6 m²
Cylinder volume/HSE
1 : 1,127.29
Adhesive weight/Total
1 : 1.68
Tractive force/Heating surface
1 : 10.10
Grate area/Heating surface
1 : 61.67
Firebox/Tube surface
1 : 15.04
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.