Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Southern Railway (UK) class Q1

Great Britain 1942 40 produced
flickr/stratfordman72

In World War II the Southern Railway, usually making most of its revenue with commuter traffic, found itself on the front line. So they urgently needed a goods locomotive that could be built cheaply and quickly, saved strategic resources and was powerful. Oliver Bulleid decided to build a locomotive with the traditional 0-6-0 wheel arrangement, but more powerful than all others. He also removed all parts which were not essential for operation, but incorporated some innovations in the basic structure.

The most prominent feature of the Q1 was the boiler that had plain and flat side walls, which resulted from the fiberglass insulation and enabled them to use coach washers. The wheels with a diameter of 5 ft 1 in were of the Bulleid Firth Brown type also found on the Pacifics of the same designer. The cylinders were on the inside and had generous steam passages. The chimney was fitted with a five-nozzle blast pipe. All in all, they were still so light that they could be used on almost the entire Southern network.

20 locomotives each were built at Brighton and at Ashford. They were the most powerful 0-6-0 ever built in Britain and were assigned power class 5F when taken over by British Railways in 1948. Due to their unconventional look, they got several nicknames like “Ugly Ducklings”, “Coffee Pots” or “Frankensteins”. Nevertheless, they fulfilled their tasks and even hauled passenger trains on secondary lines. They were withdrawn between 1963 and 1966 and today only the first locomotive numbered C1 is preserved. It ran for the last time in 2000 and is now located in the NRM at York.

Technical data

General

Built
1942
Manufacturers
Brighton, Ashford
Wheel arrangement
0-6-0 (Six-coupled)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
16.73 m
Wheelbase
5.94 m
Service mass
52.3 t
Adhesion mass
52.3 t
Total mass
90.7 t
Rigid wheelbase
5.94 m
Water capacity
16,822 l
Fuel capacity
5.1 t (coal)

Boiler

Grate area
2.508 m²
Firebox surface
15.794 m²
Tube heating surface
120.96 m²
Evaporative heating surface
136.753 m²
Superheater surface
20.253 m²
Total heating surface
157.0 m²

Power plant

Driver diameter
1,549 mm
Boiler pressure
15.9 bar
Expansion type
simple expansion
Cylinders
two, 483 x 660 mm

Power

Power source
steam
Estimated power
1,044 kW (1,419 PS)
Starting effort
133.8 kN

Calculated values

Factor of adhesion
1 : 3.84
Optimal speed
48 km/h
Power-to-weight ratio
20.0 kW/t
Heating Surface Equivalent
256.2 m²
Cylinder volume/HSE
1 : 942.91
Adhesive weight/Total
1 : 1.00
Tractive force/Heating surface
1 : 17.80
Grate area/Heating surface
1 : 62.60
Firebox/Tube surface
1 : 7.66
Total/Superheater
1 : 6.75
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.