Banner
Navigation
loco-info.com
The reference for locomotives and railcars

South German Railway Company No. 104 and Alb Valley Railway No. 12s

Brohltal Railway No. II

Germany 1925 2 produced
Nr. 104 “Zell” in April 1961 at Todtnau collection R.Scholz

In 1925, the Zell-Todtnau Railway in the southern Black Forest, operated by the SEG (Süddeutsche Eisenbahn-Gesellschaft), needed a more powerful freight locomotive. They ordered their No. 104 from Hanomag that was based on the Bavarian Gts 2x3/3. So it also was a 0-6-6-0 Mallet tank locomotive, but in contrast to its Bavarian models had a saturated boiler and larger water supplies.

The locomotive was named “Zell” and mostly used to haul standard-gauge cars on transporter wagons. In 1953, the line became part of the Mittelbadische Eisenbahnen (MEG) and the locomotive was still numbered 104. In 1967, freight traffic was moved onto the road and the locomotive was sold to the Blonay-Chamby Museum Railway in Switzerland. Today, it is being refurbished.

A second locomotive of identical design was built for the Alb Valley Railway in 1928 and numbered 12s. As it was actually too heavy for this line, it was sold to the Brohl Valley Railway in 1934 and became their number II. There it was able to cut running costs as it managed to replace rack locomotives with adhesion service. It was retired and scrapped in 1957.

www.blonay-chamby.ch

Technical data

General

Built
1925, 1928
Manufacturers
Hanomag
Wheel arrangement
0-6-6-0T (Erie (Mallet))
Gauge
1,000 mm (Meter gauge)

Dimensions and weights

Length
11.56 m
Wheelbase
7.00 m
Empty mass
45 t
Service mass
56.5 t
Adhesion mass
56.5 t
Rigid wheelbase
2.50 m
Axle load
9 t
Water capacity
6,000 l
Fuel capacity
1.5 t (coal)

Boiler

Grate area
1.85 m²
Firebox surface
7.38 m²
Tube heating surface
73.8 m²
Evaporative heating surface
81.18 m²
Total heating surface
81.2 m²

Power plant

Driver diameter
900 mm
Boiler pressure
14 bar
Expansion type
compound
Cylinders
four, HP: 400 x 450 mm and LP: 620 x 450 mm

Power

Power source
steam
Indicated power
430 kW (585 PS)
Top speed
35 km/h
Starting effort
134.4 kN
Starting effort simple
161.3 kN

Calculated values

Factor of adhesion
1 : 4.12
Optimal speed
19 km/h
Power-to-weight ratio
7.6 kW/t
Heating Surface Equivalent
118.1 m²
Cylinder volume/HSE
1 : 2,108.36
Adhesive weight/Total
1 : 1.00
Tractive force/Heating surface
1 : 34.59
Grate area/Heating surface
1 : 43.88
Firebox/Tube surface
1 : 10.00
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.