Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

German Reichsbahn E 251

German Reichsbahn class 251 and DB AG class 171

Germany 1965 15 produced
251 014 with a lime train and another, pushing 251 in February 1990 near Hüttenrode Werner & Hansjörg Brutzer

The E 251, from 1970 class 251 or class 171 at Deutsche Bahn, was an electric locomotive that was specially developed for the Rübelandbahn in Saxony-Anhalt. Although the line had already been rebuilt in the 1930s, the slopes of the Harz Mountains still required gradients of up to six percent. Finally, in the 1960s, due to the increasingly heavy lime and ore trains, it was decided that the line should be electrified. In contrast to the remaining lines in Germany, this was done in the system with 25.000 Volts and 50 Hz, which led to the development of the E 251.

Based on the DR electric locomotives E 11 and E 42, this resulted in a more powerful, six-axle design whose systems were designed for the special power system. Since the line did not allow high speeds, the speed was reduced to 80 km/h. This further increased the tractive power and now also made a cheaper layout with nose-suspended motors possible. In addition, the tighter curves on the Rübelandbahn were taken into account with a special design of the bogies. Now it was possible to pull freight trains of 600 tonnes up the steep inclines, each with a leading and a trailing locomotive. The total of 15 locomotives that were built proved themselves on this line and still hauled both freight and passenger trains in the days of the Deutsche Bahn. However, the latter fell away in 2000 due to new regulations on automatic door controls, until the class finally had to hand over its service in front of freight trains to modern multi-system locomotives in 2004.

Technical data

General

Built
1965
Manufacturers
LEW Hennigsdorf
Wheel arrangement
C-C
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
18.64 m
Service mass
124 t
Adhesion mass
124 t
Axle load
20.7 t

Power

Power source
electric - AC
Hourly power
3,660 kW (4,976 PS)
Continuous power
3,300 kW (4,487 PS)
Top speed
80 km/h
Starting effort
373.0 kN

Calculated values

Factor of adhesion
1 : 3.26
Power-to-weight ratio
29.5 kW/t
Adhesive weight/Total
1 : 1.00

Topics

  • electric locomotive
  • passenger
  • freight
CompareComment
Last changed: 02/2022

Watch on YouTube

Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.