South African class 5 “Enlarged Karoo”
Based on the 4-6-2 Karoo class locomotives, the Cape Government Railways ordered four “Enlarged Karoo” locomotives also designed by H.M. Beatty shortly before the founding of the South African Railways. In comparison to the original Karoo, they had a higher pitched boiler, larger wheels and larger cylinders. In contrast to earlier CGR locomotives, they had a Belpaire firebox and no round-topped one. They were only delivered in 1912 directly to the SAR and called class 5, while the original Karoo locomotives were called class 5A and 5B.
In 1935, in a time when many SAR locomotives got superheated A.G. Watson standard boilers, only one Enlarged Karoo got this boiler. In this process it was renamed class 5R it also got larger drivers, larger cylinders and a lower boiler pressure. While the unrebuilt locomotives were relegated to secondary services in 1928 and withdrawn in 1942, the single class 5R locomotive survived until 1969. For a long time it had been in use in suburban services around Cape Town and was regularly operated at 60 mph (97 km/h) until the mid-sixties.
Technical data
General
| Property | class 5 | rebuilt 5R |
|---|---|---|
| Built | 1912 | 1935 |
| Manufacturers | Vulcan Foundry | SAR |
| Wheel arrangement | 4-6-2 (Pacific) | |
| Gauge | 1,067 mm (Cape gauge) | |
Dimensions and weights
| Property | class 5 | rebuilt 5R |
|---|---|---|
| Length | 19.52 m | 19.56 m |
| Wheelbase | 8.97 m | |
| Total wheelbase | 17.02 m | |
| Service mass | 69.3 t | 73.6 t |
| Adhesion mass | 47 t | 47.7 t |
| Total mass | 119.5 t | 123.8 t |
| Rigid wheelbase | 3.25 m | |
| Axle load | 16 t | 16.7 t |
| Water capacity | 18,185 l | |
| Fuel capacity | 10.2 t (coal) | |
Boiler
| Property | class 5 | rebuilt 5R |
|---|---|---|
| Grate area | 3.177 m² | 3.345 m² |
| Firebox surface | 13.192 m² | 11.427 m² |
| Tube heating surface | 178.746 m² | 139.076 m² |
| Evaporative heating surface | 191.938 m² | 150.503 m² |
| Total heating surface | 191.9 m² | 184.5 m² |
| Superheater surface | 34.003 m² |
Power plant
| Property | class 5 | rebuilt 5R |
|---|---|---|
| Driver diameter | 1,549 mm | 1,575 mm |
| Boiler pressure | 13.8 bar | 13.1 bar |
| Expansion type | simple expansion | |
| Cylinders | two, 483 x 711 mm | two, 508 x 711 mm |
Power
| Property | class 5 | rebuilt 5R |
|---|---|---|
| Power source | steam | |
| Estimated power | 727 kW (988 PS) | 858 kW (1,167 PS) |
| Starting effort | 125.3 kN | 129.8 kN |
Calculated values
| Property | class 5 | rebuilt 5R |
|---|---|---|
| Factor of adhesion | 1 : 3.68 | 1 : 3.61 |
| Optimal speed | 35 km/h | 40 km/h |
| Power-to-weight ratio | 10.5 kW/t | 11.7 kW/t |
| Heating Surface Equivalent | 257.9 m² | 275.6 m² |
| Cylinder volume/HSE | 1 : 1,008.88 | 1 : 1,045.90 |
| Adhesive weight/Total | 1 : 1.48 | 1 : 1.54 |
| Tractive force/Heating surface | 1 : 13.64 | 1 : 14.69 |
| Grate area/Heating surface | 1 : 60.41 | 1 : 55.16 |
| Firebox/Tube surface | 1 : 13.55 | 1 : 12.17 |
| Total/Superheater | 1 : 4.43 |