London & North Western Whale Precursor class
London, Midland & Scottish class 3P
Since 1877, Francis Webb had the “Improved Precedent” built for the LNWR, but it still had to be run double headed for heavy express trains. So later George Whale developed the Precursor class, which was basically based on its predecessor and had a leading bogie. Since Webb had already developed a Precursor class, it is also referred to as “Whale Precursor”. A 4-4-2T tank locomotive called the “Precursor Tank” soon followed.
Between 1904 and 1907 130 locomotives were built. From 1913 onwards, the first ones were rebuilt with a superheater and received new cylinders with a diameter of 20.5 instead of 19 inches. The LMS took over the locomotives in 1923 and assigned them power class 3P. The remaining ones without superheaters were withdrawn between 1927 and 1936, the ones that were superheated until 1949.
Two developments were designed based on the Whale Precursor class. The first was the Experiment class, which Whale developed as a ten-wheeler in 1905. Whale's successor Bowen Cooke developed the “George the Fifth” class on the same basis, which still had the 4-4-0 wheel arrangement.
Technical data
General
- Built
- 1904-1907
- Manufacturers
- Crewe
- Wheel arrangement
- 4-4-0 (American)
- Gauge
- 1,435 mm (Standard gauge)
Dimensions and weights
- Wheelbase
- 7.66 m
- Total wheelbase
- 14.42 m
- Service mass
- 59.9 t
- Adhesion mass
- 38.6 t
- Total mass
- 91.4 t
- Rigid wheelbase
- 3.05 m
- Axle load
- 19.3 t
- Water capacity
- 16,364 l
- Fuel capacity
- 6.4 t (coal)
Boiler
- Grate area
- 2.081 m²
- Firebox surface
- 14.985 m²
- Tube heating surface
- 171.75 m²
- Evaporative heating surface
- 186.735 m²
- Total heating surface
- 186.7 m²
Power plant
- Driver diameter
- 2,057 mm
- Boiler pressure
- 12.1 bar
- Expansion type
- simple expansion
- Cylinders
- two, 483 x 660 mm
Power
- Power source
- steam
- Estimated power
- 690 kW (938 PS)
- Starting effort
- 76.7 kN
Calculated values
- Factor of adhesion
- 1 : 4.94
- Optimal speed
- 55 km/h
- Power-to-weight ratio
- 11.5 kW/t
- Heating Surface Equivalent
- 261.7 m²
- Cylinder volume/HSE
- 1 : 923.35
- Adhesive weight/Total
- 1 : 1.55
- Tractive force/Heating surface
- 1 : 8.58
- Grate area/Heating surface
- 1 : 89.73
- Firebox/Tube surface
- 1 : 11.46