Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Southern Railway (UK) class V “Schools”

Great Britain 1930 40 produced
No. 925 “Cheltenham” in September 2013 on the Severn Valley Railway Peter Broster CC BY 2.0

The Southern needed a fast passenger locomotive for lines of medium importance, which allowed relatively high axle loads, but had a smaller loading gauge or shorter turntables. Since no locomotives with a 4-6-0 wheel arrangement could be used here, a locomotive with a 4-4-0 wheel arrangement that was as powerful as possible had to be designed. A higher axle load was also accepted and the Hastings line was rebuilt accordingly. The new locomotive was the last one in Great Britain with this wheel arrangement.

Maunsell took the Lord Nelson class as a model and designed a scaled-down version of it. Since its Belpaire firebox did not allow a cab that fitted into the loading gauge, a different boiler had to be used. This was found in the King Arthur class with a round-topped firebox. The firebox was adopted unchanged and the boiler barrel was shortened. With three cylinders, a starting tractive effort was achieved that was on par with the King Arthur.

The total of 40 locomotives were named after public schools, which is where the name “Schools class” came from. They were considered a very successful design right from the start and were the most powerful 4-4-0 locomotives in Europe. Despite the smoother power development of the three cylinders, they tended to slip when starting due to the high tractive effort. However, they also performed well with poor coal. A locomotive made the run from London-Waterloo to Southampton with a 510 ton train at an average of 51 mph (98 km/h). The highest recorded speed is 95 mph (153 km/h).

Over time, the locomotives received several improvements. From the second production batch smoke deflectors were installed and retrofitted to the first batch. 20 units later received a Lemaître blastpipe. Since this did not prove its worth, no more were rebuilt. Under British Railways, they were also used in the Western Region and Wales. They were soon replaced by diesel-electric railcars and retired between 1961 and 1962. Today three are preserved, all of which have run in reservation.

Technical data

General

Built
1930-1935
Manufacturers
Eastleigh
Wheel arrangement
4-4-0 (American)
Gauge
1,435 mm (Standard gauge)

Dimensions and weights

Length
17.93 m
Wheelbase
7.77 m
Service mass
68.2 t
Adhesion mass
42.7 t
Total mass
111.3 t
Rigid wheelbase
3.05 m
Axle load
21.3 t
Water capacity
18,185 l
Fuel capacity
5.1 t (coal)

Boiler

Grate area
2.629 m²
Firebox surface
15.05 m²
Tube heating surface
164.067 m²
Evaporative heating surface
179.117 m²
Superheater surface
26.292 m²
Total heating surface
205.4 m²

Power plant

Driver diameter
2,007 mm
Boiler pressure
15.2 bar
Expansion type
simple expansion
Cylinders
three, 419 x 660 mm

Power

Power source
steam
Estimated power
1,156 kW (1,572 PS)
Starting effort
111.8 kN

Calculated values

Factor of adhesion
1 : 3.74
Optimal speed
63 km/h
Power-to-weight ratio
17.0 kW/t
Heating Surface Equivalent
307.0 m²
Cylinder volume/HSE
1 : 890.40
Adhesive weight/Total
1 : 1.60
Tractive force/Heating surface
1 : 11.37
Grate area/Heating surface
1 : 78.13
Firebox/Tube surface
1 : 10.90
Total/Superheater
1 : 6.81

Topics

  • steam locomotive
  • express
  • Richard Edward Lloyd Maunsell
CompareComment
Last changed: 05/2023

Watch on YouTube

Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.