New Zealand Railways class AB
The NZR class AB was a class of 141 superheated two-cylinder Pacifics. Its origins can be traced back to the class A of 1906 that was a saturated four-cylinder compound. No. 409 of this class was built as a simple two-cylinder and in 1915, production of the superheated class AB started. By 1927, 38 had been built in the NZR Addington Workshops, 83 by North British and 20 by A & G Price. The locomotives from North British differed from the rest in a firebox area of 124 instead of 115 square feet and a superheater that was only 155 instead of 204 square feet.
A feature of these locomotives was the Vanderbilt tender. They were the largest class of NZR steam locomotives and were used in passenger and freight service. On relatively flat lines, they could handle 350-ton express trains at 60 mph or 97 km/h and were able to haul freight trains of 750 tons. Some claim that they were the first steam locomotives to reach a power of 1 hp for every 100 pounds of empty weight. As loco-info's power estimation leads to 0.0096 hp per pound of service weight, this claim might actually be true.
The superheated standard boiler of the AB was later also fitted to locomotives of the classes Q and AA. The class WAB was a 4-6-4T tank locomotive that was built in parallel to the AB with the same boiler. Between 1947 and 1957, eleven of these were rebuilt to the AB.
The most time of their career, they were used on the North Island. When diesel locomotives arrived there around 1955, they came to the South Island. In the late fifties and early sixties, some were withdrawn and others with damaged frames got the frames from these withdrawn locomotives. They spent their last years on branch lines and between 1963 and 1967, the largest number was withdrawn. The last ones survived until the end of steam in 1971. Today seven are preserved, with three currently operational.
Technical data
General
- Built
- 1915-1927
- Manufacturers
- Addington, North British, A & G Price
- Wheel arrangement
- 4-6-2 (Pacific)
- Gauge
- 1,067 mm (Cape gauge)
Dimensions and weights
- Length
- 19.03 m
- Wheelbase
- 8.26 m
- Total wheelbase
- 16.00 m
- Service mass
- 52.1 t
- Adhesion mass
- 30.4 t
- Total mass
- 86.1 t
- Rigid wheelbase
- 3.05 m
- Axle load
- 11.5 t
- Water capacity
- 15,910 l
- Fuel capacity
- 4.1 t (coal)
Boiler
- Grate area
- 3.066 m²
- Firebox surface
- 10.684 m²
- Tube heating surface
- 95.969 m²
- Evaporative heating surface
- 106.653 m²
- Superheater surface
- 18.952 m²
- Total heating surface
- 125.6 m²
Power plant
- Driver diameter
- 1,372 mm
- Boiler pressure
- 12.4 bar
- Expansion type
- simple expansion
- Cylinders
- two, 432 x 660 mm
Power
- Power source
- steam
- Estimated power
- 820 kW (1,115 PS)
- Top speed
- 97 km/h
- Starting effort
- 94.7 kN
Calculated values
- Factor of adhesion
- 1 : 3.15
- Optimal speed
- 53 km/h
- Power-to-weight ratio
- 15.7 kW/t
- Heating Surface Equivalent
- 198.0 m²
- Cylinder volume/HSE
- 1 : 976.96
- Adhesive weight/Total
- 1 : 1.72
- Tractive force/Heating surface
- 1 : 15.75
- Grate area/Heating surface
- 1 : 40.97
- Firebox/Tube surface
- 1 : 8.98
- Total/Superheater
- 1 : 5.63