Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Baden VI c

German Reichsbahn classes 754 and 7510-11

Germany 1914 135 produced
75 1118, the last VI c to be retired in July 1990 in Stubersheim Werner & Hansjörg Brutzer

The VI c was developed to complement the tank locomotives of the class VI b. Although it had a similar outward appearance, it was intended to be considerably more powerful. This was achieved primarily through the use of superheating and the higher axle loads that had now become possible. The new locomotives were designed to haul 350-ton trains at 80 km/h on level track and, on the steeper sections of the Black Forest Railway with gradients of 1.7 percent, to maintain 35 km/h with 200-ton trains. The resulting locomotives had a service weight around tonnes greater than that of the VI b due to their reinforced construction and larger supplies.

As on the predecessor, both carrying axles were designed as Adams axles, but the driving wheel diameter was increased from 1,480 to 1,600 mm, allowing a maximum speed of 90 km/h. The continuous plate frame was narrowed at both ends to accommodate the Adams axles and also carried a water tank that contributed to the frame's rigidity. In keeping with the larger driving wheels, the boiler was positioned higher, while the single steam dome, replacing the previous arrangement, became a distinguishing feature of the new locomotives. Owing to the significantly larger boiler, the boiler pressure could be reduced from 13 to 12 bars while still achieving a substantial increase in performance.

Between 1914 and 1921, a total of 135 locomotives were built in nine production batches, most of them by Karlsruhe and a smaller number by Jung. Differences existed between the batches. First, a feedwater heater was introduced; later, a steel firebox replaced the copper one; and finally, the last two batches received a strengthened frame. Thanks to their large numbers, these locomotives eventually accounted for well over half of all locomotives in Baden. After the First World War, 28 were surrendered as war reparations, while the remainder were also used in suburban services in the following years. On the Reichsbahn, all surviving locomotives were classified as classes 754 and 7510–11, the former designation applying to the lighter variants and the latter to the heavier ones. After the Second World War, the Bundesbahn took over 66 locomotives and operated them until 1969.

Die Lokomotive, August 1918

Technical data

General

Property 1914 variant 1920 variant
Built 1914-1919 1920-1921
Manufacturers MBG Karlsruhe, Jung
Wheel arrangement 2-6-2T (Prairie)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property 1914 variant 1920 variant
Length 12.70 m
Wheelbase 8.90 m
Empty mass 57.9 t 61.3 t
Service mass 78 t 79.5 t
Adhesion mass 49.7 t 50.6 t
Axle load 16.8 t
Water capacity 10,000 l
Fuel capacity 4 t (coal)

Boiler

Property 1914 variant 1920 variant
Grate area 2.06 m²
Firebox surface 9.96 m²
Tube heating surface 96.15 m² 93.56 m²
Evaporative heating surface 106.11 m² 103.52 m²
Superheater surface 40.75 m²
Total heating surface 146.9 m² 144.3 m²

Power plant

Property 1914 variant 1920 variant
Driver diameter 1,600 mm
Boiler pressure 12 bar
Expansion type simple expansion
Cylinders two, 540 x 640 mm

Power

Property 1914 variant 1920 variant
Power source steam
Indicated power 580 kW (789 PS)
Top speed 90 km/h
Starting effort 119.0 kN

Calculated values

Property 1914 variant 1920 variant
Factor of adhesion 1 : 4.09 1 : 4.17
Optimal speed 31 km/h
Power-to-weight ratio 7.4 kW/t 7.3 kW/t
Heating Surface Equivalent 237.4 m² 234.8 m²
Cylinder volume/HSE 1 : 1,234.78 1 : 1,248.40
Adhesive weight/Total 1 : 1.57
Tractive force/Heating surface 1 : 16.92 1 : 17.22
Grate area/Heating surface 1 : 71.29 1 : 70.03
Firebox/Tube surface 1 : 9.65 1 : 9.39
Total/Superheater 1 : 2.60 1 : 2.54
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.