Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Companhia Paulista No. 204 to 211, later 401 to 408

Brazil 1921 8 produced
Locomotive Magazine, January 1922

In 1921 ALCO-GE built twelve electric locomotives for the Paulista of which eight were designed for freight traffic. The first line that had been electrified with 3 kV DC was the one between Jundiahy and Campinas that was 45 km long and had inclines of 1.8 percent. The main reason for electrification was that fire wood for steam locomotives had become scarce and good coal was difficult to obtain.

The freight locomotives had two two-axle bogies with a 420 hp traction motor on each axle and a boxcab body that led to the nickname “Quadradinha”. Haulage capacity on 1.8 percent inclines was 700 tonnes at speeds between 19 and 26 km/h. When running downhill, they could use their regenerative brake. Originally numbered 204 to 211, they were later renumbered to 401 to 408. When FEPASA was founded in 1971, they became class 6400. They were withdrawn between 1974 and 1978.

Schematic drawing Locomotive Magazine, January 1922

Technical data

General

Built
1921
Manufacturers
ALCO-GE
Wheel arrangement
B-B
Gauge
1,600 mm (Irish broad gauge)

Dimensions and weights

Length
11.94 m
Wheelbase
8.13 m
Service mass
90.7 t
Adhesion mass
90.7 t
Rigid wheelbase
2.64 m
Axle load
22.7 t

Power

Power source
electric - DC
Hourly power
1,253 kW (1,704 PS)
Continuous power
1,193 kW (1,622 PS)
Top speed
45 km/h
Starting effort
266.9 kN

Calculated values

Factor of adhesion
1 : 3.33
Power-to-weight ratio
13.8 kW/t
Adhesive weight/Total
1 : 1.00
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.