Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

London, Brighton & South Coast class A1 “Terrier”

Great Britain 1872 50 produced
Southern Railway W11 “Newport” in May 2022 on the Isle of Wight“” kitmasterbloke CC BY 2.0

For commuter traffic in the south and southeast of London, William Stroudley developed the class A1, of which a total of 50 were built between 1872 and 1880. The tank locomotives with an 0-6-0T wheel arrangement had small driving wheels and were able to rapidly accelerate the commuter trains of that time. Nevertheless, they were able to reach speeds of up to 60 mph (97 km/h) and a sustained speed of just under 50 mph (80 km/h). Because of their small size and barking exhaust noise, they were nicknamed “terriers”.

With the introduction of the more powerful class D1 with 0-4-2T wheel arrangement and the electrification of the first commuter lines, they were no longer needed in the London area. 23 were sold to various other operators and the remainder distributed to rural lines, mainly in Sussex. There they were mostly used in passenger service, sometimes also as push-pull trains. Others were used in shunting duties.

Between 1911 and 1913, 17 A1s were rebuilt into the A1X, becoming heavier and having, among other things, larger cylinders and a longer smokebox. Many survived the Southern Railway and came to the British Railways. Many retirements only came from 1960 onwards. The last ones only disappeared in November 1963 when the Hayling Island Branch was closed.

Technical data

General

Property as built rebuilt A1X
Built 1872-1880
Manufacturers Brighton
Wheel arrangement 0-6-0T (Six-coupled)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property as built rebuilt A1X
Length 7.94 m
Wheelbase 3.66 m
Service mass 27.9 t 28.7 t
Adhesion mass 27.9 t 28.7 t
Rigid wheelbase 3.66 m
Water capacity 2,271 l

Boiler

Property as built rebuilt A1X
Grate area 0.929 m²
Firebox surface 5.11 m²
Tube heating surface 49.053 m²
Evaporative heating surface 54.163 m²
Total heating surface 54.2 m²

Power plant

Property as built rebuilt A1X
Driver diameter 1,219 mm
Boiler pressure 9.7 bar 10.3 bar
Expansion type simple expansion
Cylinders two, 305 x 508 mm two, 356 x 508 mm

Power

Property as built rebuilt A1X
Power source steam
Estimated power 164 kW (223 PS) 186 kW (253 PS)
Starting effort 31.8 kN 46.3 kN

Calculated values

Property as built rebuilt A1X
Factor of adhesion 1 : 8.63 1 : 6.07
Optimal speed 32 km/h 24 km/h
Power-to-weight ratio 5.9 kW/t 6.5 kW/t
Heating Surface Equivalent 79.7 m²
Cylinder volume/HSE 1 : 930.00
Adhesive weight/Total 1 : 1.00
Tractive force/Heating surface 1 : 12.25
Grate area/Heating surface 1 : 58.30
Firebox/Tube surface 1 : 9.60
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.