Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Sligo, Leitrim & Northern Counties Leitrim class

Ireland 1882 5 produced
Locomotive Magazine, May 1903

The Sligo, Leitrim and Northern Counties Railway operated a 43-mile line in northern Ireland from 1877, which consisted only of the main line and had no branch lines. However, since this route, which was built in the Irish broad gauge of 5 ft 3 in, was only laid out with light rails, the running characteristics of the two 0-6-2T locomotives “Pioneer” and “Sligo” left a lot to be desired. The solution was to replace the trailng axle with a bogie. 

The company Beyer, Peacock & Co. had delivered locomotives of this type to the South Australian Railways as class K from 1879, which were also designed for lightly built routes. So they ordered two locomotives with the names “Fermanagh” and “Leitrim”, which were basically an enlarged class K. Since these proved themselves, three more examples followed by 1899, named “Lurganboy”, “Lissadell” and “Hazelwood”. The first of these locomotives, now known as the Leitrim class, were not retired until 1947 and one remained in service until 1957, when the SL&NCR ceased operations.

Model of the “Fermanagh” Bradley Wurth / CC BY-SA 4.0

Technical data

General

Built
1882-1899
Manufacturers
Beyer, Peacock & Co.
Wheel arrangement
0-6-4T
Gauge
1,600 mm (Irish broad gauge)

Dimensions and weights

Wheelbase
7.09 m
Service mass
43.6 t
Adhesion mass
27.2 t
Rigid wheelbase
3.37 m
Water capacity
6,545 l
Fuel capacity
1.8 t (coal)

Boiler

Grate area
1.384 m²
Firebox surface
7.042 m²
Tube heating surface
83.353 m²
Evaporative heating surface
90.395 m²
Total heating surface
90.4 m²

Power plant

Driver diameter
1,422 mm
Boiler pressure
9 bar
Expansion type
simple expansion
Cylinders
two, 419 x 508 mm

Power

Power source
steam
Estimated power
205 kW (279 PS)
Starting effort
47.8 kN

Calculated values

Factor of adhesion
1 : 5.59
Optimal speed
26 km/h
Power-to-weight ratio
4.7 kW/t
Heating Surface Equivalent
125.6 m²
Cylinder volume/HSE
1 : 1,115.87
Adhesive weight/Total
1 : 1.60
Tractive force/Heating surface
1 : 11.04
Grate area/Heating surface
1 : 65.31
Firebox/Tube surface
1 : 11.84
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.