Chicago & North Western class D
The class of the D Chicago & North Western was one of the first Atlantics with a wide firebox. With this arrangement, it was quickly discovered that firing was much easier and that much power could even be delivered with inferior coal. Production consisted of a first variant, of which 77 were built between 1900 and 1907, and another, of which 14 were built in 1908.
The first variant had an inside Stephenson valve gear with valves that were also inside the frame. The last ten of the second variant were built with a Walschaert valve gear and Young rotary valves.
The locomotives pulled trains, usually consisting of ten, sometimes eleven cars. 74 were later retrofitted with a superheater. When the wooden cars were replaced with steel cars and more powerful express locomotives were introduced, the class D was used in commuter and local traffic. Almost all locomotives survived into the late 1930s, 15 even survived into the late 1940s.
Technical data
General
| Property | 1900 variant | 1908 variant | superheated |
|---|---|---|---|
| Built | 1900-1908 | ||
| Manufacturers | ALCO | CNW | |
| Wheel arrangement | 4-4-2 (Atlantic) | ||
| Gauge | 1,435 mm (Standard gauge) | ||
Dimensions and weights
| Property | 1900 variant | 1908 variant | superheated |
|---|---|---|---|
| Wheelbase | 8.15 m | ||
| Total wheelbase | 17.67 m | 17.86 m | 17.67 m |
| Service mass | 71.7 t | 83 t | 82.3 t |
| Adhesion mass | 41.3 t | 43.1 t | 44.2 t |
| Total mass | 135.2 t | 148.5 t | 147.6 t |
| Rigid wheelbase | 2.13 m | ||
| Axle load | 20.6 t | 21.5 t | 22.1 t |
| Water capacity | 28,391 l | ||
| Fuel capacity | 9.1 t (coal) | ||
Boiler
| Property | 1900 variant | 1908 variant | superheated |
|---|---|---|---|
| Grate area | 4.301 m² | ||
| Firebox surface | 18.488 m² | 18.311 m² | 18.488 m² |
| Tube heating surface | 261.708 m² | 256.31 m² | 183.484 m² |
| Evaporative heating surface | 280.196 m² | 274.622 m² | 201.971 m² |
| Total heating surface | 280.2 m² | 274.6 m² | 242.8 m² |
| Superheater surface | 40.784 m² | ||
Power plant
| Property | 1900 variant | 1908 variant | superheated |
|---|---|---|---|
| Driver diameter | 2,032 mm | 2,057 mm | |
| Boiler pressure | 13.8 bar | ||
| Expansion type | simple expansion | ||
| Cylinders | two, 508 x 660 mm | ||
Power
| Property | 1900 variant | 1908 variant | superheated |
|---|---|---|---|
| Power source | steam | ||
| Estimated power | 1,174 kW (1,596 PS) | 1,342 kW (1,825 PS) | |
| Starting effort | 98.3 kN | 97.1 kN | |
Calculated values
| Property | 1900 variant | 1908 variant | superheated |
|---|---|---|---|
| Factor of adhesion | 1 : 4.12 | 1 : 4.35 | 1 : 4.47 |
| Optimal speed | 72 km/h | 74 km/h | 85 km/h |
| Power-to-weight ratio | 16.4 kW/t | 14.1 kW/t | 16.3 kW/t |
| Heating Surface Equivalent | 372.6 m² | 366.2 m² | 376.0 m² |
| Cylinder volume/HSE | 1 : 718.41 | 1 : 731.08 | 1 : 712.02 |
| Adhesive weight/Total | 1 : 1.74 | 1 : 1.93 | 1 : 1.86 |
| Tractive force/Heating surface | 1 : 7.33 | 1 : 7.38 | 1 : 8.35 |
| Grate area/Heating surface | 1 : 65.15 | 1 : 63.85 | 1 : 56.44 |
| Firebox/Tube surface | 1 : 14.16 | 1 : 14.00 | 1 : 9.92 |
| Total/Superheater | 1 : 4.95 |