Cananea, Rio Yaqui & Pacifico class EG, later E-1
Southern Pacific classes M-9 and M-11
The CRY&P had been built to haul mineral resources and agricultural products over the mountains in Sonora. For this task, they ordered 30 2-6-0 locomotives which had been derived from the Harriman Common Standard design. The first 15 were built in 1908 by ALCO-Brooks and numbered 500 to 514. Although they were operated with saturated steam, they had piston valves. The second half of the order was built by Baldwin in 1909. Their owner was now owned by the Ferrocarril de Sud Pacifico de México, a subsidiary of the Southern Pacific from the US. They were numbered 515 to 529 and had a larger grate to burn local low-calorie lignite.
In 1912 a part of the class came to other Southern Pacific subsidiaries. The locomotives of the ALCO batch became SP class M-9 and the Baldwin locomotives became class M-11. The Houston & Texas Central received seven M-9 and numbered them 550 to 556. They also received five M-11 and numbered them 560 to 564 and 576. Three M-9 came to the Arizona Eastern and became numbers 567 to 569, while their six M-11 got the numbers 570 to 574 and 576. Some years later, many got a superheater. They were retired between 1949 and 1957.
Technical data
General
| Property | 500-514 | 515-529 | M-11 superheated |
|---|---|---|---|
| Built | 1908 | 1909 | |
| Manufacturers | ALCO | Baldwin | |
| Wheel arrangement | 2-6-0 (Mogul) | ||
| Gauge | 1,435 mm (Standard gauge) | ||
Dimensions and weights
| Property | 500-514 | 515-529 | M-11 superheated |
|---|---|---|---|
| Wheelbase | 7.32 m | ||
| Total wheelbase | 16.23 m | ||
| Service mass | 89 t | 79.4 t | 81.8 t |
| Adhesion mass | 69.2 t | 68 t | 69.4 t |
| Total mass | 142 t | 139.8 t | 142.2 t |
| Rigid wheelbase | 4.62 m | ||
| Axle load | 23.1 t | 22.7 t | |
| Water capacity | 26,498 l | ||
| Fuel capacity | 12.7 t (coal) | ||
Boiler
| Property | 500-514 | 515-529 | M-11 superheated |
|---|---|---|---|
| Grate area | 4.599 m² | 6.689 m² | 4.599 m² |
| Firebox surface | 13.564 m² | 15.794 m² | 15.143 m² |
| Tube heating surface | 181.719 m² | 189.151 m² | 163.324 m² |
| Evaporative heating surface | 195.282 m² | 204.944 m² | 178.467 m² |
| Total heating surface | 195.3 m² | 204.9 m² | 211.3 m² |
| Superheater surface | 32.795 m² |
Power plant
| Property | 500-514 | 515-529 | M-11 superheated |
|---|---|---|---|
| Driver diameter | 1,600 mm | ||
| Boiler pressure | 13.8 bar | ||
| Expansion type | simple expansion | ||
| Cylinders | two, 508 x 711 mm | two, 533 x 711 mm | two, 559 x 711 mm |
Power
| Property | 500-514 | 515-529 | M-11 superheated |
|---|---|---|---|
| Power source | steam | ||
| Estimated power | 932 kW (1,267 PS) | 969 kW (1,317 PS) | 1,119 kW (1,521 PS) |
| Starting effort | 134.4 kN | 148.2 kN | 162.7 kN |
Calculated values
| Property | 500-514 | 515-529 | M-11 superheated |
|---|---|---|---|
| Factor of adhesion | 1 : 5.05 | 1 : 4.50 | 1 : 4.19 |
| Optimal speed | 42 km/h | 40 km/h | 42 km/h |
| Power-to-weight ratio | 10.5 kW/t | 12.2 kW/t | 13.7 kW/t |
| Heating Surface Equivalent | 263.1 m² | 283.9 m² | 319.8 m² |
| Cylinder volume/HSE | 1 : 1,095.75 | 1 : 1,119.51 | 1 : 1,090.90 |
| Adhesive weight/Total | 1 : 1.29 | 1 : 1.17 | 1 : 1.18 |
| Tractive force/Heating surface | 1 : 14.38 | 1 : 15.10 | 1 : 16.08 |
| Grate area/Heating surface | 1 : 42.46 | 1 : 30.64 | 1 : 45.94 |
| Firebox/Tube surface | 1 : 13.40 | 1 : 11.98 | 1 : 10.79 |
| Total/Superheater | 1 : 5.44 |