Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Spanish State Railways 242F

Spain 1955 10 produced
2001 at test runs in Tarragona MTM

In Spain the 4-8-4 wheel arrangement was called “Confederacion”. The only series-produced tender locomotive of this wheel arrangement in Western Europe was the RENFE 242 T, numbered 2001 to 2010. These ten locomotives were designed by José Augé Farreras and built in 1955 by MTM. Each locomotive weighed 142.5 tonnes of which nearly 80 rested on the driving wheels which had a diameter of 1,900 mm. The boiler was the same as in the 2-10-2 of the Norte series 5000. As the F in the class designation suggests, they were built as oil burners from the start.

The first of the class set up a record as the fastest Spanish steam locomotive with 150 km/h, hauling a train of 480 tonnes. In regular service they were limited to 120 km/h and their maximum power is sometimes stated as 3,110 kW or 4,225 hp. On an incline of one percent, they could haul 600 tonnes with 55 km/h. Originally they were used on the Madrid-Hendaye line, but when this was electrified in 1968 they came to the Ebro-Zaragoza line. After they had been withdrawn in 1974, 242 F 2009 was restored from 1987. Today it is on display in the Museum at Madrid-Delicias.

Technical data

General

Built
1955
Manufacturers
MTM
Wheel arrangement
4-8-4 (Northern)
Gauge
1,668 mm (Iberian broad gauge)

Dimensions and weights

Length loco
17.48 m
Wheelbase
13.20 m
Total wheelbase
22.93 m
Service mass
142.5 t
Adhesion mass
78.6 t
Total mass
212.7 t
Rigid wheelbase
5.55 m
Axle load
22 t
Water capacity
27,000 l
Fuel capacity
13,500 l (oil)

Boiler

Grate area
5.3 m²
Firebox surface
26.15 m²
Tube heating surface
290.45 m²
Evaporative heating surface
316.6 m²
Superheater surface
104.5 m²
Total heating surface
421.1 m²

Power plant

Driver diameter
1,900 mm
Boiler pressure
16 bar
Expansion type
simple expansion
Cylinders
two, 640 x 710 mm

Power

Power source
steam
Estimated power
2,700 kW (3,671 PS)
Top speed
120 km/h
Starting effort
208.2 kN

Calculated values

Factor of adhesion
1 : 3.70
Optimal speed
79 km/h
Power-to-weight ratio
18.9 kW/t
Heating Surface Equivalent
656.4 m²
Cylinder volume/HSE
1 : 695.99
Adhesive weight/Total
1 : 1.81
Tractive force/Heating surface
1 : 10.32
Grate area/Heating surface
1 : 79.45
Firebox/Tube surface
1 : 11.11
Total/Superheater
1 : 3.03
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.