Banner
Navigation
loco-info.com
The reference for locomotives and railcars

Austrian Federal Railways (BBÖ) class 2040/s

Austrian Federal Railways (BBÖ) class 2190

Austria 1934 3 produced
2190.01 in May 1995 in Lunz am See CC BY 3.0

The Ober-Grafendorf-Gresten local railway, also known as “Krumpe”, was a branch line of the Mariazell railway. For more efficient operation, the BBÖ ordered two small diesel locomotives from Simmering, which they delivered in 1934. In contrast to most locomotives of this size class, the power transmission was electrical, with the electrical part of the locomotives coming from the Siemens-Schuckert works. Two years later, a third locomotive was procured, which had a slightly more powerful motor.

The locomotives were mainly used to pull passenger trains. After the annexation of Austria in 1938, the three locomotives were run by the Reichsbahn as road numbers V 15 901 to 903. From 1953 they became class 2190 at ÖBB. The first two engines were retired in 1981 and 1983. The 01 was made operational again with parts of the 02 and has been running on the Ybbstalbahn since 1991. After it ran off on the mountain in 2018 and derailed, it is waiting for its repair. The 03 was decommissioned in 1969 due to its condition, but was put back into service in 1974 after being refurbished. It got a new motor in 1992, for which it is easier to obtain spare parts, and it still serves as a shunting locomotive in St. Pölten today.

Technical data

General

Property 01, 02 03
Built 1934 1936
Manufacturers Simmering, SSW
Wheel arrangement B
Gauge 760 mm (Bosnian gauge)

Dimensions and weights

Property 01, 02 03
Length 5.72 m
Wheelbase 2.40 m
Service mass 12 t 12.9 t
Adhesion mass 12 t 12.9 t
Rigid wheelbase 2.40 m
Axle load 6 t 6.4 t

Power plant

Property 01, 02 03
Engine GMB 147/15 GMB 147/18
Engine type V8 diesel

Power

Property 01, 02 03
Power source diesel-electric
Indicated power 87 kW (118 PS) 96 kW (131 PS)
Top speed 45 km/h
Starting effort 22.0 kN 25.0 kN

Calculated values

Property 01, 02 03
Factor of adhesion 1 : 5.35 1 : 5.04
Power-to-weight ratio 7.3 kW/t 7.5 kW/t
Adhesive weight/Total 1 : 1.00
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.