Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Caledonian classes 49 and 903 “Cardean”

Great Britain 1903 7 produced
No. 904 is her first years in Carlisle Kris Wilson / flickr

The Caledonian Railway had to operate many express trains with two 4-4-0 locomotives and also needed a helper locomotive at Beattock Summit. To improve this, McIntosh developed a 4-6-0 in 1903. Initially these were just two locomotives, numbers 49 and 50, which were based on the Dunalastair and had inside cylinders. Although these became the flagship of the CR, their performance was not outstanding and there were no sufficiently long turntables.

After longer turntables were built, McIntosh had five improved locomotives built, numbers 903 to 907. The 903 was the only one in the new series to be given the name “Cardean” and thus gave rise to the nickname of the class. All of them received a superheater in 1911, but due to the reduced boiler pressure they hardly had any noticeable increase in output.

However, since this reduced coal consumption, all of them were taken over by the LMS in 1923. There they were soon eclipsed by the LMS Compound and Royal Scot. They were retired between 1927 and 1933, with the exception of the 907, which was written off in 1915 after Britain's worst rail disaster.

Technical data

General

Property 49 903 superheated
Built 1903 1906 1911
Manufacturers St. Rollox
Wheel arrangement 4-6-0 (Ten-wheeler)
Gauge 1,435 mm (Standard gauge) 0 mm

Dimensions and weights

Property 49 903 superheated
Wheelbase 8.74 m
Service mass 74 t 73.1 t 67.4 t
Adhesion mass 55.9 t 55.4 t 55.8 t
Total mass 130.1 t 131 t 125.3 t
Rigid wheelbase 4.57 m
Axle load 18.8 t
Water capacity 22,731 l
Fuel capacity 6.1 t (coal) 5.1 t (coal)
Total wheelbase 17.32 m

Boiler

Property 49 903 superheated
Grate area 2.415 m²
Firebox surface 13.471 m² 13.773 m²
Tube heating surface 209.497 m² 215.071 m² 154.753 m²
Evaporative heating surface 222.968 m² 228.542 m² 168.526 m²
Total heating surface 223.0 m² 228.5 m² 216.5 m²
Superheater surface 47.938 m²

Power plant

Property 49 903 superheated
Driver diameter 1,981 mm
Boiler pressure 13.8 bar 12.1 bar
Expansion type simple expansion
Cylinders two, 533 x 660 mm two, 508 x 660 mm two, 527 x 660 mm

Power

Property 49 903 superheated
Power source steam
Estimated power 783 kW (1,065 PS) 790 kW (1,074 PS) 802 kW (1,090 PS)
Starting effort 111.2 kN 100.8 kN 95.0 kN

Calculated values

Property 49 903 superheated
Factor of adhesion 1 : 4.93 1 : 5.39 1 : 5.76
Optimal speed 43 km/h 48 km/h 51 km/h
Power-to-weight ratio 10.6 kW/t 10.8 kW/t 11.9 kW/t
Heating Surface Equivalent 290.3 m² 295.9 m² 333.3 m²
Cylinder volume/HSE 1 : 1,016.60 1 : 904.72 1 : 864.65
Adhesive weight/Total 1 : 1.33 1 : 1.32 1 : 1.21
Tractive force/Heating surface 1 : 10.41 1 : 9.21 1 : 9.16
Grate area/Heating surface 1 : 92.33 1 : 94.63 1 : 89.63
Firebox/Tube surface 1 : 15.55 1 : 15.97 1 : 11.24
Total/Superheater 1 : 3.52
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.