Banner
Navigation
loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings
British Rail class 58
go back
Great Britain | 1982
50 produced
58035 with an empty coal train at Woodthorpe
58035 with an empty coal train at Woodthorpe
Phil Sangwell

When it became clear that production of larger numbers of the class 56 would be too expensive, British Rail started development of a simpler successor. The new type became class 58 and the first ones were introduced into service in 1983. Like American diesel locomotives, they had a strong main frame that carried all weight. Not only the engine and it accessories were built in modules, even the cabs could be replaced after an accident. Their general appearance earned them the nickname “Bone”.

The engine was a development of the one used in the class 56, but with 12 cylinders instead of 16 and the same output. To load and unload coal trains, they got slow speed control that allowed to run at speeds as low as one mile per hour. After privatisation, all came to EWS, which used them until 2002. After this, some were sold or leased, partly to Spain, France and the Netherlands. The last ones in the UK were withdrawn in 2010 and also abroad, most are now scrapped.

General
Built1982-1987
ManufacturerBREL
Axle configC-C 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length62 ft 9 in
Wheelbase48 ft 9 in
Rigid wheelbase13 ft 9 in
Service weight286,600 lbs
Adhesive weight286,600 lbs
Axle load47,840 lbs
Boiler
Power Plant
Power
Power sourcediesel-electric
Top speed80 mph
Starting effort60,000 lbf
EngineRuston Paxman 12RK3ACT
Engine typeV12 diesel
Fuel1,183 us gal (diesel)
Engine output3,300 hp (2,461 kW)
Calculated Values
diesel locomotive
freight
last changed: 03/2025
Search
loadding loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language