loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 690105
London, Brighton & South Coast No. 53
Great Britain | 1873
only one produced
collection Dave Searle

The machine numbered LB&SCR number 53 was one of four locomotives which were originally destined for the Tunis & Goletta Railway, where one of Craven's sons was involved. After he had died and the railway went bankrupt, the locomotives found other operators. After only works No. 2241 could be sold to the Jersey Railway, 2242 was bought by Stroudley and thus joined the LB&SCR at Craven's suggestion.

It was first used in front of light passenger trains over short distances on main lines and was renumbered as early as November 1875 to number 270 with the name “Bishopstone”. The single locomotive was also used in part to transport high-ranking personalities to an audience with Queen Victoria. After a few years it disappeared from the main line and was subsequently used on branch lines between London Bridge, Victoria, Epsom and Leatherhead. After being renamed “Fratton” and two more renumberings, its career ended in September 1890.

General
Built1873
ManufacturerSharp, Stewart & Co.
Axle config2-4-0T (Porter) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Wheelbase12 ft 5 in
Rigid wheelbase12 ft 5 in
Water capacity576 us gal
Fuel capacitycoal
Boiler
Firebox area47 sq ft
Tube heating area523 sq ft
Evaporative heating area570 sq ft
Total heating area570 sq ft
Power Plant
Driver diameter48 in
Boiler pressure130 psi
Expansion typesimple
Cylinderstwo, 12 x 17 in
Power
Power sourcesteam
Estimated power150 hp (112 kW)
Optimal speed17 mph
Starting effort5,636 lbf
Calculated Values
steam locomotive
tank locomotive
passenger
John Chester Craven
last changed: 09/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language