Compare locomotives
Add a locomotive
Denver & Rio Grande Western class C-19
After the Consolidations of the classes 56 and 60, the D&RG received twelve larger class 70 locomotives in 1881. They were used, among other things, as helpers on a four percent steep incline. Five locomotives were co...
General
| Property | Denver & Rio Grande Western class C-19Remove |
|---|---|
| Built | 1881 |
| Manufacturers | Baldwin |
| Wheel arrangement | 2-8-0 (Consolidation) |
| Gauge | 914 mm (Three feet) |
Dimensions and weights
| Property | Denver & Rio Grande Western class C-19Remove |
|---|---|
| Wheelbase | 5.51 m |
| Rigid wheelbase | 3.58 m |
| Service weight | 33.7 t |
| Adhesive weight | 29 t |
| Axle load | 9 t |
| Total weight | 57.7 t |
| Water capacity | 9,464 l |
| Fuel capacity | 5.4 t (coal) |
Boiler
| Property | Denver & Rio Grande Western class C-19Remove |
|---|---|
| Grate area | 1.394 m² |
| Firebox surface | 7.544 m² |
| Tube heating surface | 78.577 m² |
| Evaporative heating surface | 86.121 m² |
| Total heating surface | 86.1 m² |
Power plant
| Property | Denver & Rio Grande Western class C-19Remove |
|---|---|
| Driver diameter | 914 mm |
| Boiler pressure | 9 bar |
| Expansion type | simple expansion |
| Cylinders | two, 406 x 508 mm |
Power
| Property | Denver & Rio Grande Western class C-19Remove |
|---|---|
| Power source | steam |
| Estimated power | 261 kW (355 PS) |
| Starting effort | 69.9 kN |
Calculated values
| Property | Denver & Rio Grande Western class C-19Remove |
|---|---|
| Factor of adhesion | 1 : 4.07 |
| Optimal speed | 23 km/h |
| Power-to-weight ratio | 7.7 kW/t |
| Heating Surface Equivalent | 123.8 m² |
| Cylinder volume/HSE | 1 : 1,064.21 |
| Adhesive weight/Total | 1 : 1.16 |
| Tractive force/Heating surface | 1 : 16.95 |
| Grate area/Heating surface | 1 : 61.78 |
| Firebox/Tube surface | 1 : 10.42 |
