Banner
Navigation

Navigation

loco-info.com
The reference for locomotives and railcars

Compare locomotives

Add a locomotive

Frisco Lines classes 4100, 4135 and 4150

No. 4162 in September 1947 in Claremore, Oklahoma

The Frisco Lines received a total of 65 Mikados with additional booster between 1923 and 1926, based on the USRA Heavy Mikado . The first 35 locomotives had Baker valve gear and were fired with coal or oil, depending ...

General

Property Frisco Lines classes 4100, 4135 and 4150 Remove
Built 1926
Manufacturers Baldwin
Wheel arrangement 2-8-2 (Mikado)
Gauge 1,435 mm (Standard gauge)

Dimensions and weights

Property Frisco Lines classes 4100, 4135 and 4150 Remove
Wheelbase 11.25 m
Rigid wheelbase 5.11 m
Total wheelbase 22.61 m
Service weight 158.6 t
Adhesive weight 120.7 t
Axle load 30.2 t
Total weight 264.3 t
Water capacity 44,289 l
Fuel capacity 17,034 l (oil)

Boiler

Property Frisco Lines classes 4100, 4135 and 4150 Remove
Grate area 6.531 m²
Firebox surface 35.396 m²
Tube heating surface 342.998 m²
Evaporative heating surface 378.394 m²
Superheater surface 104.609 m²
Total heating surface 483.0 m²

Power plant

Property Frisco Lines classes 4100, 4135 and 4150 Remove
Driver diameter 1,600 mm
Boiler pressure 13.8 bar
Expansion type simple expansion
Cylinders two, 686 x 813 mm

Power

Property Frisco Lines classes 4100, 4135 and 4150 Remove
Power source steam
Estimated power 2,610 kW (3,549 PS)
Starting effort 280.0 kN
Starting effort booster 49.82 kN

Calculated values

Property Frisco Lines classes 4100, 4135 and 4150 Remove
Factor of adhesion 1 : 4.23
Optimal speed 56 km/h
Power-to-weight ratio 16.5 kW/t
Heating Surface Equivalent 764.6 m²
Cylinder volume/HSE 1 : 785.36
Adhesive weight/Total 1 : 1.31
Tractive force/Heating surface 1 : 12.11
Grate area/Heating surface 1 : 73.96
Firebox/Tube surface 1 : 9.69
Total/Superheater 1 : 3.62
Auf Deutsch umschalten

Settings

Your settings are retained for this browser session only.

Consent to cookies

We use cookies to save your display settings. If you decline, the settings are retained only for the current browser session.