Compare locomotives
Add a locomotive
South African class 25NC
The non-condensing class 25NC was built in parallel with the condensing class 25. Like this, it was designed by L.C. Grubb with engineering support from Krupp. Both had the same boiler with Melesco superheater and onl...
General
| Property | South African class 25NC EW2 tender |
|---|---|
| Built | 1953-1955 |
| Manufacturers | Henschel, North British |
| Wheel arrangement | 4-8-4 (Northern) |
| Gauge | 1,067 mm (Cape gauge) |
Dimensions and weights
| Property | South African class 25NC EW2 tender |
|---|---|
| Length | 32.77 m |
| Wheelbase | 11.58 m |
| Rigid wheelbase | 4.80 m |
| Total wheelbase | 29.00 m |
| Service weight | 119.3 t |
| Adhesive weight | 75.4 t |
| Axle load | 19 t |
| Total weight | 226.6 t |
| Water capacity | 50,918 l |
| Fuel capacity | 19.3 t (coal) |
Boiler
| Property | South African class 25NC EW2 tender |
|---|---|
| Grate area | 6.503 m² |
| Firebox surface | 30.751 m² |
| Tube heating surface | 284.191 m² |
| Evaporative heating surface | 314.942 m² |
| Superheater surface | 58.529 m² |
| Total heating surface | 373.5 m² |
Power plant
| Property | South African class 25NC EW2 tender |
|---|---|
| Driver diameter | 1,524 mm |
| Boiler pressure | 15.5 bar |
| Expansion type | simple expansion |
| Cylinders | two, 610 x 711 mm |
Power
| Property | South African class 25NC EW2 tender |
|---|---|
| Power source | steam |
| Estimated power | 2,498 kW (3,396 PS) |
| Starting effort | 228.7 kN |
Calculated values
| Property | South African class 25NC EW2 tender |
|---|---|
| Factor of adhesion | 1 : 3.24 |
| Optimal speed | 68 km/h |
| Power-to-weight ratio | 20.9 kW/t |
| Heating Surface Equivalent | 585.8 m² |
| Cylinder volume/HSE | 1 : 708.74 |
| Adhesive weight/Total | 1 : 1.58 |
| Tractive force/Heating surface | 1 : 12.79 |
| Grate area/Heating surface | 1 : 57.43 |
| Firebox/Tube surface | 1 : 9.24 |
| Total/Superheater | 1 : 5.38 |