loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings
Paris-Lyon-Méditerranée 161 DE
French State Railway 1CC1 3800 and 1C 1000
France | 1927
10 produced
View of the 161 DE 1
View of the 161 DE 1

Fives-Lille supplied the ten freight locomotives 161 DE 1 to 10, which again consisted of two halves. In each half of the locomotive, three powered axles were mounted in the frame, which, like the 161 CE, were supplemented by a movably mounted leading axle. The weight distribution was designed in such a way that the leading axles each had to carry less than ten tonnes and therefore more adhesion mass was available. Instead of platforms at the ends of the locomotives, there were smaller hoods, while the doors were attached to the sides. When the locos were taken over by the SNCF, they became the 1CC1 3801 to 3810. The last examples remained in service until 1973.

A special feature of the series came about during the war, when 1CC1 3805 fell victim to a bomb attack in Modane. Only one half of the locomotive was badly damaged, while the other remained largely intact. It was not until 1949 that the intact half was refurbished and used as an independent locomotive with the number 1C 1001 in shunting operations in Saint-Jean-de-Maurienne. The contact shoes for the third rail were removed so that the locomotive could only work under the catenary. The continuous output was increased to 1,070 kW and use ended in 1966.

General
Built1927
Manufacturermechanical part: Fives-Lille, electrical part: Schneider et Cie
Axle config1-C+C-1 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length70 ft 10 3/8 in
Wheelbase57 ft 6 9/16 in
Rigid wheelbase14 ft 2 1/16 in
Service weight285,498 lbs
Adhesive weight252,209 lbs
Axle load42,035 lbs
Boiler
Power Plant
Power
Power sourceelectric - DC
Electric system1,500 V
Continuous power1,706 hp (1,272 kW)
Top speed50 mph
Calculated Values
electric locomotive
third rail
freight
two-section
last changed: 03/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language