loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings
Tank Locomotives with Passenger or Luggage Compartment[Inhalt]
Great Southern & Western No. 99 to 100
Ireland | 1890
2 produced
as built with passenger compartment
as built with passenger compartment
Locomotive Magazine, May 1903

For the branch line between Gortatlea and Castleisland in Kerry County, the GSWR had two vehicles built in Inchicore in 1890, which can be described as precursors to the steam railcar. Since commercial traffic with regular passenger trains could hardly be carried out on the line, an extra light tank locomotive was combined with a passenger compartment. However, according to Locomotive Magazine, issue May 1903, the passenger compartments were not actually used for their intended purpose.

schematic drawing after the rebuild
schematic drawing after the rebuild
Locomotive Magazine, November 1903

Later the locomotives were moved to the Fermoy-Mitchelstown line in Cork County, which used a very light rail profile, only 50 pounds per yard. While no heavier locomotives could be used there, the axle load of the two vehicles was low enough. Here they had to conquer gradients of 1 in 60. The passenger compartments were soon removed, allowing the locomotives to be used as conventional tank locomotives. They spent the last years of their service as shunting locomotives in the port of Cork.

Variantas builtrebuilt as tank engine
General
Built1890
ManufacturerInchicore
Axle config0-6-4WT 0-6-0T 
Gauge5 ft 3 in (Irish broad gauge)
Dimensions and Weights
Length22 ft 3 1/2 in
Wheelbase10 ft 11 in
Rigid wheelbase10 ft 11 in
Service weight52,305 lbs
Adhesive weight52,305 lbs
Axle load17,920 lbs
Boiler
Grate area10 sq ft
Firebox area52 sq ft
Tube heating area310 sq ft
Evaporative heating area362 sq ft
Total heating area362 sq ft
Variantas builtrebuilt as tank engine
Power Plant
Driver diameter44 in
Boiler pressure150 psi
Cylinderstwo, 10 x 18 in
Power
Starting effort5,216 lbf
Calculated Values
steam railcar
tank locomotive
passenger
secondary line
last changed: 06/2022
London, Brighton & South Coast No. 96
Great Britain | 1869
only one produced
After being rebuilt in No. 481 “Inspector”
After being rebuilt in No. 481 “Inspector”
Locomotive Magazine, May 1898
Schematic drawing: original state
Schematic drawing: original state
www.lbscr.org
Schematic drawing after the 1877 rebuild
Schematic drawing after the 1877 rebuild
Locomotive Magazine, May 1898
Schematic drawing after the rebuild to No. 481 “Inspector”
Schematic drawing after the rebuild to No. 481 “Inspector”
Locomotive Magazine, May 1898

The LB&SCR commissioned a small tank engine in 1869 to haul light passenger trains on the branch line between Brighton Central and Kemp Town. The locomotive was initially given the number 96 and the name “Kemp Town”. In 1874 it was transferred to Havant near Portsmouth and given the number 115 while she was named “Hayling Island”.

In its new location it soon underwent a makeover to plans by William Stroudley, incorporating a new chimney, larger steam dome and cab. During this time the running number changed twice, first to 359 and then to 499.

A major remodeling was also carried out under Stroudley in 1889. A passenger compartment was installed behind the driver's cab for inspection trips along the routes of the LB&SCR. To carry the additional weight, a trailing axle was attached at the same time, which, like the leading axle, was fixed in the frame. In this form, the locomotive received the number 481 and the name “Inspector”. Its service in this role lasted for at least a decade.

Variantas builtrebuilt
General
Built18691898
ManufacturerSharp, Stewart & Co.
Axle config2-4-0T (Porter) 2-4-2T 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Wheelbase11 ft
Rigid wheelbase11 ft
Service weight43,456 lbs
Adhesive weight30,016 lbs
Axle load15,680 lbs
Fuel capacitycoal
Boiler
Firebox area33.8 sq ft
Tube heating area278.5 sq ft
Evaporative heating area312.3 sq ft
Total heating area312.3 sq ft
Variantas builtrebuilt
Power Plant
Driver diameter48 in
Boiler pressure130 psi
Expansion typesimple
Cylinderstwo, 10 x 16 in
Power
Power sourcesteam
Estimated power80 hp (60 kW)
Optimal speed14 mph
Starting effort3,683 lbf
Calculated Values
tank locomotive
passenger
inspection engine
last changed: 06/2022
Austrian Federal Railways (BBÖ) DT 1 Dorftrottel“”
Austria | 1935
20 produced
DT 1.07 in October 1993 in Orth an der Donau
DT 1.07 in October 1993 in Orth an der Donau
Herbert Ortner
General
Built1935-1938
ManufacturerFloridsdorf
Axle config2-4-2T 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length36 ft 8 15/16 in
Wheelbase25 ft 1 9/16 in
Rigid wheelbase10 ft 6 in
Empty weight77,823 lbs
Service weight98,767 lbs
Adhesive weight57,320 lbs
Axle load28,660 lbs
Water capacity1,400 us gal
Fuel capacity3,880 lbs (coal)
Boiler
Grate area8.9 sq ft
Firebox area47.9 sq ft
Tube heating area409.4 sq ft
Evaporative heating area457.3 sq ft
Superheater area230.3 sq ft
Total heating area687.6 sq ft
Power Plant
Driver diameter57.1 in
Boiler pressure261 psi
Expansion typesimple
Cylinderstwo, 11 7/16 x 22 7/16 in
Power
Power sourcesteam
Estimated power268 hp (200 kW)
Optimal speed15 mph
Top speed62 mph
Starting effort11,372 lbf
Calculated Values
steam railcar
baggage railcar
secondary line
Austrian North Western Railway series IXb No. 402 to 410
Imperial-Royal State Railways class 4.0
Austria-Hungary | 1880
9 produced
No. 403
No. 403
General
Built1880
ManufacturerFloridsdorf
Axle config0-2-2T 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length27 ft 8 3/8 in
Wheelbase12 ft 5 5/8 in
Rigid wheelbase12 ft 5 5/8 in
Empty weight35,715 lbs
Service weight44,092 lbs
Adhesive weight26,015 lbs
Axle load26,015 lbs
Water capacity238 us gal
Fuel capacity3,307 lbs (coal)
Boiler
Grate area6.9 sq ft
Firebox area39.8 sq ft
Tube heating area415.5 sq ft
Evaporative heating area455.3 sq ft
Total heating area455.3 sq ft
Power Plant
Driver diameter40 in
Boiler pressure145 psi
Expansion typesimple
Cylinderstwo, 8 7/8 x 15 3/4 in
Power
Power sourcesteam
Estimated power161 hp (120 kW)
Optimal speed27 mph
Starting effort3,811 lbf
Calculated Values
baggage railcar
steam railcar
secondary line
St. Lawrence & Adirondack “Ne-Ha-Sa-Ne”
United States | 1896
only one produced
Railway and Locomotive Engineering, May 1896

The “Ne-Ha-Sa-Ne” was an inspection locomotive of the St. Lawrence & Adirondack Railway used by their president W.S. Webb. Originally it had been built in 1896 by Schenectady as a generic 4-4-0 for the Fall Brook Railway Company, but in 1899 it was damaged in an accident. After that, it was sold to its new owner and rebuilt for its new purpose.

The passenger compartment had enough space for six chairs and was finished with mahogany and carpet. The locomotive had also enough power to haul Webb's private car that weighed 120,000 pounds. However, it wasn't used by Webb for long and was soon sold to the Central Railroad of Pennsylvania.

General
Built1896
ManufacturerSchenectady
Axle config4-4-0 (American) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Service weight78,700 lbs
Adhesive weight49,700 lbs
Axle load24,850 lbs
Boiler
Evaporative heating area783.7 sq ft
Total heating area783.7 sq ft
Power Plant
Driver diameter63 in
Boiler pressure190 psi
Expansion typesimple
Cylinderstwo, 14 x 22 in
Power
Power sourcesteam
Starting effort11,054 lbf
Calculated Values
steam locomotive
inspection engine
last changed: 09/2024
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language