Banner
Navigation
loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings
Nordhausen-Wernigerode Railway No. 31 and 32
FC Potosí Sucre Tarabuco No. 3 and 4
go back
| 1910
2 produced
O&K works photo
O&K works photo

At the beginning of the 20th century, the NWE got two 0-6-6-0T Mallet locomotives from Orenstein & Koppel which were to be more powerful than the existing 0-4-4-0T Mallets. They were introduced into service in 1910 as the first six-axle Mallets in Germany and were numbered 31 and 32. Their area of service were the Harz and Brocken lines which had tight curves and inclines of up to 3.3 percent.

The rear axles were mounted in outside frames, while the front bogie had inside frames. The central axle of each group had 15 mm of lateral play. For additional safety on the steep lines, they had a Riggenbach counter-pressure brake. The boiler with a grate of 1.9 square meters was also superheated. With an indicated output of 600 hp, they could haul 150 tonnes at 2.7 percent with 25 km/h.

In 1914, the Ferrocarril Machacamarca–Uncía in Bolivia got four locomotives of the same type which where oil-fired. After No. 32 had an accident after only ten years of service, both locomotives of the NWE were retired and refurbished to be sold to the Ferrocarril Potosí Sucre Tarabuco, also in Bolivia. Sources suggest that they were still in service in the seventies. In 2008, both could still be identified in parts at Sucre.

General
Built1910
ManufacturerOrenstein & Koppel
Wheel arr.0-6-6-0T (Erie (Mallet)) 
Gauge3 ft 3 3/8 in (Meter gauge)
Dimensions and Weights
Length36 ft 8 15/16 in
Wheelbase20 ft 4 1/8 in
Rigid wheelbase7 ft 2 5/8 in
Empty weight97,003 lbs
Service weight119,049 lbs
Adhesive weight119,049 lbs
Axle load19,842 lbs
Water capacity1,585 us gal
Fuel capacity528 us gal (coal)
Boiler
Grate area20.5 sq ft
Tube heating area1,189.4 sq ft
Superheater area220.7 sq ft
Power Plant
Driver diameter39.4 in
Boiler pressure174 psi
Expansion typecompound
Cylindersfour, HP: 14 15/16 x 19 11/16 in
and LP: 23 5/8 x 19 11/16 in
Power
Power sourcesteam
Indicated power593 hp (442 kW)
Starting effort23,627 lbf
with start valve28,352 lbf
Calculated Values
steam locomotive
freight
passenger
narrow gauge
last changed: 08/2025
Schematic drawing
Schematic drawing
Martin Coombs / www.railwaysofthefarsouth.co.uk
Search
loadding loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language