loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 994032
British Rail BREL 1972 „PEP” EMUs
classes 313 to 315, 507, 508, 445 and 446
Great Britain | 1971
220 produced
First Capital Connect 313027 in February 2010 at Grange Park station
First Capital Connect 313027 in February 2010 at Grange Park station
Sunil060902

In 1971, British Rail Engineering Limited (BREL) introduced a new family of electric multiple units for local transport with the prototypes of the Classes 445 and 446, which became known under the type code “PEP”. The prototypes included one two-car and two four-car sets, in which all four axles of all cars were powered. Closely spaced seats with low backrests and many electrically operated doors were used for local transport. Also new were automatic couplings, which were based on the American design and additionally had electrical and pneumatic connections. The trains could thus be coupled or uncoupled during operation without the driver having to get out or requiring assistance.

Between 1973 and 1977, these three trains were subjected to extensive trial operations, during which they were mostly used coupled together to form a ten-car unit. They were then used by the network operator until 1983 and were also used to test new assemblies such as bogies. From 1976, the first production trainsets based on the prototypes were built, with the similar classes 313, 314 and 315 making the start. What these three classes had in common was that they consisted of powered control cars and non-powered trailers and were designed for operation under 25,000 V AC. The pantograph was located on the center car to better distribute the equipment over the train.

South Western Railway 455/7 at Clapham Junction station in September 2018
South Western Railway 455/7 at Clapham Junction station in September 2018
Smiley.toerist

The first was the class 313, which was built from February 1976 and additionally had contact shoes for operation under 750 V direct current via the third rail. It was used on the former Great Northern routes between London and Hertfordshire, partly using Underground tunnels. Although these tunnels were widened to accommodate regular trains, the 313 got a lower roofline.

This was followed by the class 314, which was built from 1979 for the Glasgow area and, like the class 313, was made up of three cars each. From 1980, the class 315 followed, which had a second trailer and thus had four cars each. In the course of their career, the trains were used in other areas. The contact shoes were removed from some examples of class 313 because they were no longer needed. After modernization in the areas of electronics, lighting and accessibility, they were retired from 2018. So the classes 313, 314 and 315 were replaced by the classes 717, 385 and 710.

From 1978 the Class 507 and 508 were developed for use on the Merseyrail network around Liverpool. There, the power supply is provided by direct current via the third rail. The difference between the classes is that the 507 class has only one trailer between the two powered control cars, while the 508 class has two trailers. Immediately after delivery, the 508 was transferred to London Waterloo for temporary use until the Class 455 was available in sufficient numbers. For use in the Merseyrail network, a trailer was removed again so that both classes were almost identical again. The Class 507, on the other hand, stayed on the Merseyrail network throughout its life. From 2019, both were replaced by Stadler's class 777 “Metro”.

Variant313315507445
General
Built1976-19771980-19811978-19801971
ManufacturerHolgate RoadBREL
Axle configB-B+2-2+B-B B-B+2-2+2-2+B-B B-B+2-2+B-B B-B+B-B+B-B+B-B 
Gauge4 ft 8 1/2 in (Standard gauge)
Seats232318234280
Dimensions and Weights
Length198 ft 7 1/2 in264 ft 10 in198 ft 7 1/2 in264 ft 10 in
Empty weight230,383 lbs281,089 lbs216,670 lbs312,174 lbs
Boiler
Variant313315507445
Power Plant
Power
Power sourceelectric - AC/DCelectric - ACelectric - DC
Electric system25,000 V 50 Hz, 750 V25,000 V 50 Hz600 V, 750 V750 V
Continuous power880 hp (656 kW)
Top speed75 mph
Calculated Values
EMU
suburban
local
multi-system
third rail
last changed: 09/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language