loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings
Bavarian S 2/6
Germany | 1906
only one produced

The S 2/6 was a one-off that was only intended for testing higher speeds. It was ordered in December 1905 and developed and built within just four months. In terms of wheel arrangement and driving wheel diameter, it corresponds to the Prussian test locomotive S 9, with which high-speed tests had been undertaken shortly before. In contrast to this, however, the S 2/6 was otherwise based on near-series technologies.

In addition to the two coupled wheel sets with 2,200 mm wheels, the measures used in various places to reduce air resistance are distinguishing features of the locomotive. Other express locomotives of the time also had a cone-shaped smokebox door and a driver's cab tapered at the front, but there was a smooth transition from the boiler to the driver's cab. The streamlined cladding of the chimney, steam dome and cylinders went even further.

With a large grate area compared to other locomotives, a very good evaporation performance was obtained. Together with the four-cylinder compound engine, a calculated indicated output of up to 2,200 hp was achieved during test drives. On July 2, 1907, with four wagons with a total weight of 150 tonnes it traveled at a speed of 154.5 km/h. This value was a world record and caused a stir internationally.

Immediately after the test runs, the S 2/6 was put into regular use, where it was able to reach a speed of 120 km/h with trains weighing 360 tonnes. In operation in Bavaria, it was particularly unpopular with the planning staff because it was a one-off and its characteristics differed greatly from the other locomotives used. Compared to the S 3/6, the S 2/6 had more power, but with only two coupled axles it could generate less traction, which made planning the simultaneous use of both locomotives very difficult.

In 1910 the locomotive was relocated to the Palatinate network, which belonged to Bavaria, and was more popular there. On the Reichsbahn it would have become class 15, in which it would have been the only locomotive with a 4-4-4 wheel arrangement. However, after returning to Bavaria, it was decommissioned, refurbished and taken to the Nuremberg Transport Museum in 1925, where it is to this day.

General
Built1906
ManufacturerMaffei
Axle config4-4-4 (Reading) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length69 ft 3 11/16 in
Length loco45 ft 2 5/16 in
Wheelbase38 ft 4 5/8 in
Rigid wheelbase7 ft 7 5/16 in
Total wheelbase60 ft 8 1/4 in
Empty weight164,906 lbs
Service weight181,881 lbs
Adhesive weight71,650 lbs
Axle load35,825 lbs
Water capacity6,868 us gal
Fuel capacity15,432 lbs (coal)
Boiler
Grate area50.6 sq ft
Firebox area177.6 sq ft
Tube heating area2,142 sq ft
Evaporative heating area2,319.6 sq ft
Superheater area403.6 sq ft
Total heating area2,723.3 sq ft
Power Plant
Driver diameter86.6 in
Boiler pressure218 psi
Expansion typecompound
Cylindersfour, HP: 16 1/8 x 25 3/16 in
and LP: 24 x 25 3/16 in
Power
Power sourcesteam
Indicated power2,172 hp (1,620 kW)
Optimal speed72 mph
Top speed93 mph
Starting effort19,315 lbf
with start valve23,178 lbf
Calculated Values
steam locomotive
express
Von Borries compound
Anton Hammel
last changed: 02/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language